Ignition Help

Meaningful discussion outside of the potato gun realm. Projects, theories, current events. Non-productive discussion will be locked.
Rock
Private
Private
Posts: 19
Joined: Fri Aug 10, 2007 5:16 am

Fri Mar 07, 2008 6:37 am

___
Last edited by Rock on Fri May 02, 2008 5:03 am, edited 1 time in total.
User avatar
jimmy101
Sergeant Major
Sergeant Major
United States of America
Posts: 3199
Joined: Wed Mar 28, 2007 9:48 am
Location: Greenwood, Indiana
Has thanked: 5 times
Been thanked: 17 times
Contact:

Fri Mar 07, 2008 12:38 pm

You need a switch between the flash circuit's cap and the coil, otherwise as the flash circuit generates voltage, that is supposed to be stored in the cap, it just bleeds off through the coil.

Connect a wire from one of the flashboard's "big-ass-cap" leads to one of the input leads of the coil.

Connect another wire from the the other big-ass-cap lead to a switch.

Connect the other terminal of the switch to the other input lead of the coil.

Connect the two output leads of the coil to a suitable spark gap.

Put a battery in the flashboard and turn it on. Let the big-ass-cap charge for a few seconds at least.
Image
User avatar
STHORNE
Sergeant 3
Sergeant 3
Posts: 1208
Joined: Wed Feb 14, 2007 7:50 pm
Location: Kewaunee, Wisconsin

Donating Members

Sun Mar 09, 2008 6:21 pm

TurboSuper wrote:Wiring two capacitors in series will make it less powerful, actually.
no it won't, it just takes more time to charge them. but i do suggest using a single, more powerful capacitor than multiple less powerful ones in a circuit, you'll get better performance. Also depends on the uf and wattage rating (written on the capacitor itself) to how much "juice" the capacitor can hold.
jimmy101 wrote:You need a switch between the flash circuit's cap and the coil, otherwise as the flash circuit generates voltage, that is supposed to be stored in the cap, it just bleeds off through the coil.

Connect a wire from one of the flashboard's "big-ass-cap" leads to one of the input leads of the coil.

Connect another wire from the the other big-ass-cap lead to a switch.

Connect the other terminal of the switch to the other input lead of the coil.

Connect the two output leads of the coil to a suitable spark gap.

Put a battery in the flashboard and turn it on. Let the big-ass-cap charge for a few seconds at least.
Your explanation is written very well but I'm afraid i still don't understand. Could you (or somebody) please draw a diagram of what you mean.
Forum Rules - follow them or else!
“Happiness is the meaning and the purpose of life, the whole aim and end of human existence”
TurboSuper
Corporal 5
Corporal 5
Posts: 986
Joined: Thu Jun 16, 2005 1:44 pm
Been thanked: 1 time

Sun Mar 09, 2008 6:31 pm

sthorne wrote:
TurboSuper wrote:Wiring two capacitors in series will make it less powerful, actually.
no it won't, it just takes more time to charge them. but i do suggest using a single, more powerful capacitor than multiple less powerful ones in a circuit, you'll get better performance. Also depends on the uf and wattage rating (written on the capacitor itself) to how much "juice" the capacitor can hold.
*sigh*


Yes, it will, capacitors in series follow the same formula as resistors in parallel. Therefore, the more you have, the smaller the value gets.

Ergo, more caps in series=less capacitance=less total charge time yet less power. The only benefit you get from connecting them in series is you increase their rated voltage, since they'll act like a potential divider.

Connecting them in parallel will give the effect you described above.

People, there's a wonderful wikipedia article on this if you still don't believe me:

http://en.wikipedia.org/wiki/Capacitors

As for Jimmy's instructions, he's telling you to wire the two leads of the capacitor to the two leads of the coil, with a switch in between so you can give the capacitor a chance to charge. I'd draw up a diagram, but you sound like a smart guy :wink:

You'll want a high current switch. You can also use a relay, or an SCR.
"If at first you dont succeed, then skydiving is not for you" - Darwin Awards
User avatar
STHORNE
Sergeant 3
Sergeant 3
Posts: 1208
Joined: Wed Feb 14, 2007 7:50 pm
Location: Kewaunee, Wisconsin

Donating Members

Sun Mar 09, 2008 6:45 pm

TurboSuper wrote:As for Jimmy's instructions, he's telling you to wire the two leads of the capacitor to the two leads of the coil, with a switch in between so you can give the capacitor a chance to charge. I'd draw up a diagram, but you sound like a smart guy Wink

You'll want a high current switch. You can also use a relay, or an SCR.
thanks for the help. i plan on using a high current switch to complete the circuit to the cap to let it charge, then a momentary switch (main trigger) to complete the whole circuit. Ill make a diagram of how I think i should set it up in a bit, gotta work on some homework first.
Forum Rules - follow them or else!
“Happiness is the meaning and the purpose of life, the whole aim and end of human existence”
User avatar
SpudUke5
Sergeant
Sergeant
Posts: 1099
Joined: Tue Sep 04, 2007 10:16 pm

Sun Mar 09, 2008 6:54 pm

Im sorry to hijack this topic but this is annoying me.

Internet Explorer decided to take a poop on me and be slow. So i switched to firefox which has been working fine.

But some pages come in cursive font and that annoys me because i cant read it. Since i am new to firefox i have been trying to find out how to change it but i have had no success.

So can someone tell me how to change the font?
Thx
4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
User avatar
STHORNE
Sergeant 3
Sergeant 3
Posts: 1208
Joined: Wed Feb 14, 2007 7:50 pm
Location: Kewaunee, Wisconsin

Donating Members

Sun Mar 09, 2008 7:06 pm

that's gotta be the strangest thing I've ever heard, I'm using firefox as we speak (have been for 5 years) and never had that happen to me.

try google-ing it?
Forum Rules - follow them or else!
“Happiness is the meaning and the purpose of life, the whole aim and end of human existence”
User avatar
SpudUke5
Sergeant
Sergeant
Posts: 1099
Joined: Tue Sep 04, 2007 10:16 pm

Sun Mar 09, 2008 7:10 pm

Its usually only with wikipedia and the spudwiki and a couple of other sites but im searching now as i type.
4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
User avatar
STHORNE
Sergeant 3
Sergeant 3
Posts: 1208
Joined: Wed Feb 14, 2007 7:50 pm
Location: Kewaunee, Wisconsin

Donating Members

Sun Mar 09, 2008 7:13 pm

okey dokie! tell me if you find anything, encase i may encounter the same problem
Forum Rules - follow them or else!
“Happiness is the meaning and the purpose of life, the whole aim and end of human existence”
User avatar
STHORNE
Sergeant 3
Sergeant 3
Posts: 1208
Joined: Wed Feb 14, 2007 7:50 pm
Location: Kewaunee, Wisconsin

Donating Members

Mon Mar 10, 2008 5:47 pm

Double post, i know...

anyway, i stole an ignition coil from my push mower but dont know how to make the connections because it's set up kinda weird. If somebody could edit my pic and tell/show me where i should make the connections in relation to the flash circuit, it would be greatly appreciated.
Attachments
Ignition coil
Ignition coil
Forum Rules - follow them or else!
“Happiness is the meaning and the purpose of life, the whole aim and end of human existence”
User avatar
dewey-1
Sergeant 3
Sergeant 3
Posts: 1298
Joined: Wed Mar 28, 2007 10:24 am
Location: NE Wisconsin USA

Mon Mar 10, 2008 7:57 pm

--
Last edited by dewey-1 on Sun Apr 20, 2008 1:08 pm, edited 1 time in total.
User avatar
STHORNE
Sergeant 3
Sergeant 3
Posts: 1208
Joined: Wed Feb 14, 2007 7:50 pm
Location: Kewaunee, Wisconsin

Donating Members

Mon Mar 10, 2008 8:17 pm

****! are you sure i cant use this?
Forum Rules - follow them or else!
“Happiness is the meaning and the purpose of life, the whole aim and end of human existence”
TurboSuper
Corporal 5
Corporal 5
Posts: 986
Joined: Thu Jun 16, 2005 1:44 pm
Been thanked: 1 time

Mon Mar 10, 2008 8:37 pm

Sure you can, just not with the camera flash.

If i understand correctly, it runs off mechanical power.
"If at first you dont succeed, then skydiving is not for you" - Darwin Awards
Post Reply