Spudwiki problem
- PCGUY
- Owner
- Posts: 1434
- Joined: Wed Aug 18, 2004 10:54 pm
- Location: Illinois
- Has thanked: 2 times
- Been thanked: 26 times
- Contact:
FYI anyone here can fix/add/edit the SpudWiki, since you have a SpudFiles account you can just login to the Wiki and make changes!
Yes, I am the guy that owns & operates SpudFiles (along with our extremely helpful moderators).
I know I can edit the wiki, but I didn't know what the problem was
And congrats to Larda, who helped me diagnose the problem via PM: the board was completely f*cked.
I'm hoping that more epoxy and insulation will let me achieve longer gap lengths, because right now it arcs through the insulation of the 20kV rated HV lead into the negative side at any gap over about 1" long.
Also, I opened a WMV file that was hosted on the forum this morning, and when I tried to add a WMV file it says that the format is not allowed (as it says with any other video format).
And congrats to Larda, who helped me diagnose the problem via PM: the board was completely f*cked.
I'm hoping that more epoxy and insulation will let me achieve longer gap lengths, because right now it arcs through the insulation of the 20kV rated HV lead into the negative side at any gap over about 1" long.
Also, I opened a WMV file that was hosted on the forum this morning, and when I tried to add a WMV file it says that the format is not allowed (as it says with any other video format).
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.