My First Cannon- CA1 SMSS -RETIRED-

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
nivekatoz
Specialist 2
Specialist 2
Posts: 237
Joined: Sat Nov 25, 2006 7:05 pm

Wed Jun 25, 2008 8:59 pm

In the video you put your face right in front of the cannon barrel? That was not very bright.. The chances of the cannon going off is rare but do not stick your face in front of the barrel when the cannon is pressureized. Just be safe..because if you get hurt it reflects on all of us..
SEAKING9006
Corporal 3
Corporal 3
Posts: 734
Joined: Mon Jun 23, 2008 3:20 pm
Location: Texas

Wed Jun 25, 2008 9:06 pm

Yeah, I know... It's been said already.
User avatar
judgment_arms
Sergeant 3
Sergeant 3
Posts: 1272
Joined: Tue Oct 17, 2006 8:49 pm
Location: Not so beautiful North Carolina, but at least it’s the U.S.A.!

Wed Jun 25, 2008 10:18 pm

I don’t feel like reading through all three pages but…

Image
What the heck possessed you to do that?!!?!! :shock:
There is never, I repeat NEVER, a good reason to look down the bore of any, ANY, cannon, whether it’s loaded/live or not.
Friend, do me a favor, read the safety rules, link is in my signature… :wink:

That being said, looks nice for your first cannon, some people round here didn’t even do that much for their first cannon.
Keep up the good work, and stop looking down the bore :wink: , and you’ll go far. :D


That picture needs a nice “FAIL” caption… :D
Call me "Judge", it's easier to type.

Spud gun safety rules
SEAKING9006
Corporal 3
Corporal 3
Posts: 734
Joined: Mon Jun 23, 2008 3:20 pm
Location: Texas

Wed Jun 25, 2008 10:20 pm

*facepalm*

Yes, I know......

It's been said a billion times.
Completed projects:
CA1 SMSS Basic Inline
CA3 PDAB Airburst Cannon

Current Project: Bolt action rifle (25x140mm + 1in shot)
User avatar
MrCrowley
Moderator
Moderator
Posts: 10078
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Been thanked: 3 times

Thu Jun 26, 2008 12:11 am

Thread cleaned up.
User avatar
Carlman
Staff Sergeant 2
Staff Sergeant 2
Posts: 1618
Joined: Sat Nov 24, 2007 1:18 am
Location: Western Australia
Been thanked: 2 times

Thu Jun 26, 2008 1:55 am

JSR posted that picture with 'your doing it wrong' on it but its now broken..
Image
Aussie spudders unite!!
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26204
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 572 times
Been thanked: 345 times

Donating Members

Thu Jun 26, 2008 6:23 am

Carlman wrote:JSR posted that picture with 'your doing it wrong' on it but its now broken..
works for me...
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
judgment_arms
Sergeant 3
Sergeant 3
Posts: 1272
Joined: Tue Oct 17, 2006 8:49 pm
Location: Not so beautiful North Carolina, but at least it’s the U.S.A.!

Thu Jun 26, 2008 9:35 am

Soooo… do you think we got our point across? :D
Call me "Judge", it's easier to type.

Spud gun safety rules
User avatar
Ragnarok
Captain
Captain
Posts: 5401
Joined: Tue Dec 19, 2006 8:23 am
Location: The UK

Thu Jun 26, 2008 10:51 am

starman wrote:Not only did you look into the barrel but you loaded your ammo with the chamber full of air...a big no-no especially with piston guns.
That very much depends - it's poor practice when muzzle loading, but I tend to use breech loading on my cannons, and there, it's a safer choice to pressurize, then load, because it means the cannon is in a loaded state for the shortest time possible.
Not to mention that I have a ball valve that completely seperates the barrel from the main valve when shut (which it always is except when firing) - so I'd challenge anyone to set the cannon off even if they did muzzle load.

I will admit that I do on occasion look down barrels... :shock:

... but with safety precautions as solid as the barrel not actually being attached to the cannon at the time :D (beat that for being safe).
And, even then, I only do it when I'm cleaning out the barrel, so I can check it's clean.

There is one other time it's safe to look into a barrel:
Image
Does that thing kinda look like a big cat to you?
User avatar
iPaintball
Corporal 2
Corporal 2
Posts: 695
Joined: Sun Mar 04, 2007 8:37 pm

Thu Jun 26, 2008 11:07 am

Excellent first cannon man. I know people have gone over the whole DWV debate, but if those reducers ARE in fact pressure rated, then you must've just not pushed the bushings in all of the way, giving it the appearance of the short socket depth.
Summer Projects:
CO2 tank hybrid: Gotta fix the meter :(
Cane gun: Needs a pilot/fill setup
1.5" piston valve gun: Almost done
SEAKING9006
Corporal 3
Corporal 3
Posts: 734
Joined: Mon Jun 23, 2008 3:20 pm
Location: Texas

Thu Jun 26, 2008 10:21 pm

Thanks for the compliment.

EDIT: Haha! Victory is mine! All recent posts as of 22:21 are MINE! And without doing it on purpose, too!
Completed projects:
CA1 SMSS Basic Inline
CA3 PDAB Airburst Cannon

Current Project: Bolt action rifle (25x140mm + 1in shot)
User avatar
starman
Sergeant Major
Sergeant Major
United States of America
Posts: 3027
Joined: Wed Dec 12, 2007 12:45 am
Location: Simpsonville, SC

Donating Members

Thu Jun 26, 2008 11:08 pm

Ragnarok wrote:
starman wrote:Not only did you look into the barrel but you loaded your ammo with the chamber full of air...a big no-no especially with piston guns.
That very much depends - it's poor practice when muzzle loading,

I will admit that I do on occasion look down barrels... :shock:
Yes, I was obviously referring to muzzle loading. You have a ball valve between the charged air and the barrel...he did not.

Re. the admission...confession is good for the soul. Go forth and sin no more my son....please... :wink:
User avatar
Ragnarok
Captain
Captain
Posts: 5401
Joined: Tue Dec 19, 2006 8:23 am
Location: The UK

Sat Jun 28, 2008 8:54 am

starman wrote:Re. the admission...confession is good for the soul. Go forth and sin no more my son....please... :wink:
Oh, I'd never be so daft as to look down a barrel unless I both had good reason to, and I'd taken every precaution to make it safe.

The only good reason I can think of for looking down one is when cleaning it - and as you can only properly look down a barrel when it's open at both ends (else it's completely dark down there), that means it's best removed.

If a barrel that's not attached to a cannon poses any risk beyond being a piece of pipe, I'd be rather surprised.
As the majority of spudders don't clean barrels (to the best of my knowledge), I think I'm one of the few people with a proper excuse for it.
Does that thing kinda look like a big cat to you?
SEAKING9006
Corporal 3
Corporal 3
Posts: 734
Joined: Mon Jun 23, 2008 3:20 pm
Location: Texas

Sat Jun 28, 2008 7:13 pm

By the way, has anyone hit this thing on Random Cannon yet?
Completed projects:
CA1 SMSS Basic Inline
CA3 PDAB Airburst Cannon

Current Project: Bolt action rifle (25x140mm + 1in shot)
THUNDERLORD
Sergeant 3
Sergeant 3
Posts: 1264
Joined: Fri Mar 28, 2008 1:42 pm

Wed Jul 09, 2008 12:20 am

SEAKING9006 wrote:By the way, has anyone hit this thing on Random Cannon yet?
Haven't seen it on random cannon yet. But I found a vid of:
<a href="">Your Grandpa</a> :lol: :roll: :shock:

Couldn't resist when I saw this. (Joking).
Nice write-up and videos. Building another yet? 8)
-----SPEED,STRENGTH, AND ACCURACY.-----
"Procrastination" is five syllables for "Sloth".
Theopia 8)
Born To Be Alive!
Post Reply