Where could i buy springs?

Building or modifying BB, Airsoft, and Pellet type of guns. Show off your custom designs, find tips and other discussion. Target practice only!
THUNDERLORD
Sergeant 3
Sergeant 3
Posts: 1264
Joined: Fri Mar 28, 2008 1:42 pm

Wed Jul 30, 2008 10:27 pm

nosebleedXD wrote:... i checked home depot, they said they didnt have any, but i will check again
WT... no springs at Home Depot?
I think I know why they told you that. Unless the zombie thing is starting.

Hope I don't get sued when you shoot your eye out, but if you still can't find any springs you may have to get creative and actually take apart something. whoah.

TP roll tube holders have a spring but it's probably too weak to be useful.
Pop open (automatic) umbrellas usually have a spring inside that would work.
If you can't find a used one they carry new ones in most drug stores.
Sort of expensive but...
(You could buy one when you go to pick up your meds there probably). :P :roll:

BTW if your next project has more parts I think you'll make General!
-----SPEED,STRENGTH, AND ACCURACY.-----
"Procrastination" is five syllables for "Sloth".
Theopia 8)
Born To Be Alive!
nosebleedXD
Specialist 2
Specialist 2
Posts: 246
Joined: Mon Jul 21, 2008 10:23 pm

Wed Jul 30, 2008 10:35 pm

wouldn't that be more expensive then just getting a spring?
nosebleedXD
Specialist 2
Specialist 2
Posts: 246
Joined: Mon Jul 21, 2008 10:23 pm

Wed Jul 30, 2008 10:55 pm

THUNDERLORD wrote:
nosebleedXD wrote:... i checked home depot, they said they didnt have any, but i will check again
WT... no springs at Home Depot?
I think I know why they told you that. Unless the zombie thing is starting.

Hope I don't get sued when you shoot your eye out, but if you still can't find any springs you may have to get creative and actually take apart something. whoah.

TP roll tube holders have a spring but it's probably too weak to be useful.
Pop open (automatic) umbrellas usually have a spring inside that would work.
If you can't find a used one they carry new ones in most drug stores.
Sort of expensive but...
(You could buy one when you go to pick up your meds there probably). :P :roll:

BTW if your next project has more parts I think you'll make General!
yeah alot of people told me that home depot should have it since it is a hardware store

its a new one btw that just opened in our are and it was only open for 3 hours for some community welcome openning thing

its officially openning once more tomorrow so i will go check again

and where do springs fall under
User avatar
DYI
First Sergeant 5
First Sergeant 5
Antigua & Barbuda
Posts: 2862
Joined: Sat Jul 07, 2007 8:18 pm
Location: Here and there

Thu Jul 31, 2008 9:20 am

We ship our products throughout the world using air and ocean transportation services.
:lol: That's exactly what the site said when I tried to order from them a year ago. After waiting about 7 days, I got one of those "We regret to inform you that, due to increasing customs regulations and other such bullcrap, we no longer ship to new customers outside the USA."
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.
nosebleedXD
Specialist 2
Specialist 2
Posts: 246
Joined: Mon Jul 21, 2008 10:23 pm

Thu Jul 31, 2008 10:17 am

so where would compression springs fall under

i am going to home depot once more to check

if they dont have any going to complain and say WHAT KIND OF HARDWARE STORE IS THIS
THUNDERLORD
Sergeant 3
Sergeant 3
Posts: 1264
Joined: Fri Mar 28, 2008 1:42 pm

Thu Jul 31, 2008 10:37 am

Hardware section near the nuts and bolts, should have bags of small assorted springs.(Those might be too short though) So...
Ask for a spring for an outside wood fence door. It won't be the right one but they're usually located in the same place as the spring you're looking for.

If the employee hangs around just say "thanks I will find the one here"
I wouldn't recommend complaining because they'll remember you next time you need something.

Good Luck. BTW, that made a little more sense that they just opened.
About the umbrella spring, I was really suggesting you find a broken one or one that won't be missed that's all. It seemed funny you're having trouble finding a spring but IDK... 8)
-----SPEED,STRENGTH, AND ACCURACY.-----
"Procrastination" is five syllables for "Sloth".
Theopia 8)
Born To Be Alive!
User avatar
SpudUke5
Sergeant
Sergeant
Posts: 1099
Joined: Tue Sep 04, 2007 10:16 pm

Thu Jul 31, 2008 1:38 pm

i just went to homedepot today to get a spring and i got one!

They should be near the section were doors are, thats where the associate took me too.
4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
User avatar
Coodude26
Specialist
Specialist
United States of America
Posts: 167
Joined: Sun Apr 20, 2008 1:03 pm

Thu Jul 31, 2008 1:51 pm

THUNDERLORD wrote:I wouldn't recommend complaining because they'll remember you next time you need something.
I know that feeling. I dodged so many questions when the store workers by my house were cutting me some PVC, me and my friend were there and we were like "We can't use cellular core because...uhh...it'll...break, yea"
"We can't use these [DWV] parts, they're uhh...not...going...to work...yea"

We're only 14 and they give me the feeling that if they knew what we're doing they wouldn't sell us anything anymore.
nosebleedXD
Specialist 2
Specialist 2
Posts: 246
Joined: Mon Jul 21, 2008 10:23 pm

Thu Jul 31, 2008 1:58 pm

hmm i visited home depot just 15 minutes ago

i did find some springs at the door place you were talking about but were way too small

i've visited some auto stores and found no lucky

the person told me that compression springs are not a big seller and he doesn't really know a place where you can find them

is it possible to make your own?

and once again my chamber is 8 inches long and the diameter is 1 1/2
User avatar
Coodude26
Specialist
Specialist
United States of America
Posts: 167
Joined: Sun Apr 20, 2008 1:03 pm

Thu Jul 31, 2008 2:02 pm

My friend once made one but it's hard to make them strong. He was going to make it into an airsoft grenade but it never took off.
nosebleedXD
Specialist 2
Specialist 2
Posts: 246
Joined: Mon Jul 21, 2008 10:23 pm

Thu Jul 31, 2008 2:03 pm

ok i am currently look at mcMaster
http://www.mcmaster.com/

i am looking at the compression spring part

sizes? diameter ? really confusing

am i looking for closed ends, opened ends, or closed and ground

and once again my chamber is 8 inches long and the diameter is 1 1/2
nosebleedXD
Specialist 2
Specialist 2
Posts: 246
Joined: Mon Jul 21, 2008 10:23 pm

Thu Jul 31, 2008 5:13 pm

would this spring work?

[youtube][/youtube]

i will attach to bottom pole
Attachments
your mom.JPG
your mom.JPG (12.38 KiB) Viewed 2748 times
Post Reply