glow plug idea
Okay I know the idea of using a glow plug has been thrown around and I think it has actually been done but that was with a car glow plug and a big 12v battery. I was thinking why not use a glow plug from an rc car. They are small, heat up almost instantly, and only require a 1.5v battery.
-
Xxplosive42o
- Specialist
- Posts: 134
- Joined: Tue Dec 09, 2008 5:57 pm
- Location: Los Angeles, Ca.
Your asking if a glowplug would work or not?
Well draw up an idea of how it would be implimented then we can say whether or not it will.
Remember that the glow plug is heated by an external power source. A glow plug igniter. So you will need to incorporate this item as well. The igniter heats the element in the plug, causing it to glow. This starts the chain reaction of igniting the fuel on the compression stroke and starting the internal-combustion cycle (in an RC Car).
Which kind of glow plug would you use by the way? medium, medium-cold, medium-hot, or hot? Each plug is designed for different fuel mixtures.
Just take that all into mind when concidering this project. Make sure to keep me informed if you attempt to design.
Well draw up an idea of how it would be implimented then we can say whether or not it will.
Remember that the glow plug is heated by an external power source. A glow plug igniter. So you will need to incorporate this item as well. The igniter heats the element in the plug, causing it to glow. This starts the chain reaction of igniting the fuel on the compression stroke and starting the internal-combustion cycle (in an RC Car).
Which kind of glow plug would you use by the way? medium, medium-cold, medium-hot, or hot? Each plug is designed for different fuel mixtures.
Just take that all into mind when concidering this project. Make sure to keep me informed if you attempt to design.
" Forget about all the reasons why something may not work. You only need to find one good reason why it will. "
-
CasinoVanart
- Specialist 2
- Posts: 281
- Joined: Wed Jul 30, 2008 1:10 am
I think you wouls be better served using other methods of ignition to be honest. I am not even sure that a glow plug would work, the temperature of a spark from a normal bbq sparker is far hotter than a glow plug cpould ever reach.
Add to this the constant need for fresh batteries, new glow plugs and the fact that even if it did work you would have no chance of telling when it was going to fire plus threading holes.
Turning into a rant!!
Why o why do you want to use a glowplug? Use a sparkplug and a piezo electric sparker dude.
Add to this the constant need for fresh batteries, new glow plugs and the fact that even if it did work you would have no chance of telling when it was going to fire plus threading holes.
Turning into a rant!!
Why o why do you want to use a glowplug? Use a sparkplug and a piezo electric sparker dude.
-
CasinoVanart
- Specialist 2
- Posts: 281
- Joined: Wed Jul 30, 2008 1:10 am
A piezo will still work with remote ignitionjon_89 wrote:no stun gun and would like to have remote ignition.
-
CasinoVanart
- Specialist 2
- Posts: 281
- Joined: Wed Jul 30, 2008 1:10 am
Sorry for what mate? No harm talking things through.
I have no tests results but a piezo should be able to do a good couple of metres through the right king of wire, you might just have to adjust the spark gap a little.
I have no tests results but a piezo should be able to do a good couple of metres through the right king of wire, you might just have to adjust the spark gap a little.
-
SpudBlaster15
- First Sergeant 3
- Posts: 2400
- Joined: Wed Oct 18, 2006 11:12 pm
- Has thanked: 2 times
- Been thanked: 10 times
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.
Last edited by SpudBlaster15 on Wed Jul 14, 2021 6:58 pm, edited 1 time in total.
-
CasinoVanart
- Specialist 2
- Posts: 281
- Joined: Wed Jul 30, 2008 1:10 am
IDK! What am i, a wire expert?jon_89 wrote:what kind of wire? i have tried regular 14 gauge copper wire with a small gap and it only worked for about 2 feet.
Seriously though i am sure that there is wire of a suitable guage to obtain the required results.Maybe a google would help
-
Xxplosive42o
- Specialist
- Posts: 134
- Joined: Tue Dec 09, 2008 5:57 pm
- Location: Los Angeles, Ca.
SpudBlaster15 wrote:However, I'm not sure if a glow plug would ignite a propane/air mixture. They work in glow engines due to a catalytic reaction between the methanol in the fuel and the platinum/iridium plug element. Heating the plug helps initiate the reaction, but I don't know if it would be sufficient to ignite more traditional spudgun fuels. Worth a try though.
This is true, it all has to do with the catalytic reaction platinum has with fuel. The ingitor is only a heater per-say to start the process. I found one study that investigated platinums reaction with propane. It goes as follows:
Results are presented for propane oxidation on platinum at 6 and 10 atmospheres, at temperatures from 800K to 1050K, and at equivalence ratios from 0.5 to 4.0. For turbulent transport rates as much as 20% of the fuel was found to react on the catalyst before the onset of the gas-phase ignition would begin.
I can't quite interpret that per say, but hopefully somebody can explore this notion.
" Forget about all the reasons why something may not work. You only need to find one good reason why it will. "
I have used 16 guage I think; just make your gap as small as possible, the size of the spark is not very important.jon_89 wrote:what kind of wire? i have tried regular 14 gauge copper wire with a small gap and it only worked for about 2 feet.
"You polish a turd, it's still a turd"
Remember DYI!!!
Remember DYI!!!
-
jimmy101
- Sergeant Major
- Posts: 3199
- Joined: Wed Mar 28, 2007 9:48 am
- Location: Greenwood, Indiana
- Has thanked: 5 times
- Been thanked: 17 times
- Contact:
The gauge of the wire really doesn't matter too much. 14G, 20G, 30G, they'll all work. It is much more important that the wires are kept well separated. Typical wire insulation is only good to about 300V. At the 5KV to 10 KV of a piezo the spark will jump through the insulation. The longer the wires the more likely that is. To make up for using a much higher voltage than the wire is rated for (actually, it's the wires insulation that is rated) you should basically treat the wire like it is uninsulated. If you spark gap is 1/8" then the wires should never get any closer than perhaps 1/2".jon_89 wrote:what kind of wire? i have tried regular 14 gauge copper wire with a small gap and it only worked for about 2 feet.
I'm not sure if anyone has ever tried the small glowplug from a model plane. I would have thought it had been tried. Easy enough to test, will the glowplug ignite a butane lighter or propane torch?
