Here is my collection I have acquired
<a href="http://s30.photobucket.com/albums/c325/ ... G_0151.jpg" target="_blank"><img src="http://i30.photobucket.com/albums/c325/ ... G_0151.jpg" border="0" alt="Photobucket"></a>
The FN P90 is a cheap piece of crap gun I traded from a friend and I threw on a custom paintjob for a more milsim look.
The AR is a Echo 1, shoots around 410 fps, adjustable stock and outer barrel extension(shown)
The AK is a unknown chinese brand. has decent internals and is entirely full metal(except the stock of course).
Airsoft Gun Pics Thread - post your pics!
-
Davidvaini
- Sergeant 4
- Posts: 1315
- Joined: Tue May 29, 2007 8:58 pm
got some new pics of some of my newer-ish guns 
P90 with RIS unit and homemade phantom kit suppressor(it works).
There is also an eotech on it.
And just for fun and to be crazy.. threw on my 3-12x50 illuminated range finder scope that has 30mm tube instead of a 25mm tube.
L96 loadout:
Note those pictures were taken before I got my new scope, the 3-12x50 scope goes on the l96 NOT the p90.
what do you think?
P90 with RIS unit and homemade phantom kit suppressor(it works).
There is also an eotech on it.
And just for fun and to be crazy.. threw on my 3-12x50 illuminated range finder scope that has 30mm tube instead of a 25mm tube.
L96 loadout:
Note those pictures were taken before I got my new scope, the 3-12x50 scope goes on the l96 NOT the p90.
what do you think?
Last edited by Davidvaini on Thu Apr 08, 2010 8:58 pm, edited 1 time in total.
-
whitexnightjp
- Private 3
- Posts: 42
- Joined: Sat Feb 13, 2010 11:35 am
not only can it slip under the glasses but if you dont wear a mask you can get your teeth knocked out(happened to a kid i airsoft with) i always wear a masksomtimes people wear safety glasses but a ricochet can sneak up under the glasses. Full seal eye protection should really be used at all times.
It also happened a few weeks ago to a person on our field just using safety glasses.
-
deathbyDWV
- Corporal
- Posts: 576
- Joined: Sat May 16, 2009 4:02 pm
- Location: Owasso, OK
Yeah, I used to use glasses but now I'll use a mask... Really only cuz I just bought paintball gear...
I usually just play with kids with cheap springers... So then I just use glasses...
I usually just play with kids with cheap springers... So then I just use glasses...
Life's too short to mark off the items on your wish list...
-
Davidvaini
- Sergeant 4
- Posts: 1315
- Joined: Tue May 29, 2007 8:58 pm
The l96 is a AGM l96, nothing great, performance is lacking.. but I picked it up for $10, did a nice coat of paint, and it works for a backup rifle in-case my other gun's batteries die
There is an extended rubber butpad on the p90. I do it because I find it more comfortable, get more grip and also reduces gearbox noise from traveling outwards.
There is an extended rubber butpad on the p90. I do it because I find it more comfortable, get more grip and also reduces gearbox noise from traveling outwards.
-
Mr.Sandman
- Corporal 3
- Posts: 762
- Joined: Fri Mar 28, 2008 9:10 am
- Contact:
Thought id show pics of my m24 and tsd m700
And the biggest waste of money ever, my tsd m700
And the biggest waste of money ever, my tsd m700
Yeah, it's that important.
-
potatoflinger
- Sergeant 2
- Posts: 1136
- Joined: Thu Nov 02, 2006 3:26 pm
- Location: Maryland
These are the two decent airsoft guns I have, all the rest are crappy springers and aren't even worth posting. 
The rifle is an AGM mp001. It was a fairly cheap gun but it performs very well. The manufacturer claims 380 fps, but I've chrono'd it at well over 400. The big ugly thing on the scope is a set of really bright LEDs that I added to the gun. Most of the time I play airsoft at night, so with the lights on I can see clearly through the scope out to about 200 feet. The switch for the lights is near the trigger, so I can turn them on, shoot, then turn them off before anyone really notices.
The pistol is an HFC m9 vertec. It's all metal and semi/full auto
It shoots around 350 fps.
The rifle is an AGM mp001. It was a fairly cheap gun but it performs very well. The manufacturer claims 380 fps, but I've chrono'd it at well over 400. The big ugly thing on the scope is a set of really bright LEDs that I added to the gun. Most of the time I play airsoft at night, so with the lights on I can see clearly through the scope out to about 200 feet. The switch for the lights is near the trigger, so I can turn them on, shoot, then turn them off before anyone really notices.
The pistol is an HFC m9 vertec. It's all metal and semi/full auto
It shoots around 350 fps.- Attachments
-
-
It's hard to soar with eagles when you're working with turkeys.
Well, here is mine.
Made by Ontario Kinetics, mostly brass and polycarbonate (also some aluminum, steel and SS where necessary).
Shoots ~4200 fps with a .12 (with a little bit more recoil) and has no hop-up yet (nor will it ever, as it's entirely immobile when connected to the capacitor and takes almost two hours to reload).
(I guess it's the most powerful airsoft gun posted here yet
)
Sorry Demon, couldn't resist.
Made by Ontario Kinetics, mostly brass and polycarbonate (also some aluminum, steel and SS where necessary).
Shoots ~4200 fps with a .12 (with a little bit more recoil) and has no hop-up yet (nor will it ever, as it's entirely immobile when connected to the capacitor and takes almost two hours to reload).
(I guess it's the most powerful airsoft gun posted here yet
)Sorry Demon, couldn't resist.
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.
-
Davidvaini
- Sergeant 4
- Posts: 1315
- Joined: Tue May 29, 2007 8:58 pm
okay guys, before this gets out of hand lol...
this thread is really only meant for Airsoft Gun purchases, not homemade stuff.. thats what the rest of the BBMG strafer showcase is for.. this single thread is the store purchased thread to show off your store purchased airsoft guns...
But yeah, your guy's guns are epic.
nice rifles, cant wait to post the m21 that im working on.
this thread is really only meant for Airsoft Gun purchases, not homemade stuff.. thats what the rest of the BBMG strafer showcase is for.. this single thread is the store purchased thread to show off your store purchased airsoft guns...
But yeah, your guy's guns are epic.
nice rifles, cant wait to post the m21 that im working on.
You just added that last line in the thread rules a few minutes ago, didn't you? 
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.
-
Davidvaini
- Sergeant 4
- Posts: 1315
- Joined: Tue May 29, 2007 8:58 pm
yesDYI wrote:You just added that last line in the thread rules a few minutes ago, didn't you?
but there was also a post on the first page where we actually turned this thread into a thread for everone to post their purchased airsoft guns...
I just thought i would make it more clear by putting that up in the first post as well..
Davidvaini wrote:Actually.. I got an idea.. how about we make a thread to showcase all the airsoft guns we have baught or painted.. there are enough..