ahhh f@#k i broke it

[Crna Legija]

i got a nail gun and was basically making it into what gsr did here

Link name goes here

i was putting it back together and overtighten a bold and cracked the nailgun threaded part

anyone have and idea on how to fix it ?

how do i put the link into a word like jsr does all the time ?

thanks in advance

Edited by jrrdw.

[psycix]

(url=http://www.website.com)Text(/url)
Replace round brackets with square ones.


Is it possible to run the bolt through and put a nut on the other side?

[spudtyrrant]

ok if you want some good advice i would get some batteries and us the MACRO BUTTON
it should look something like this:

[Crna Legija]

thanks psycix i think i could do that ill give it a try

@spudtyrrant
i was jokeing i only have my iphone to take pics and it crappy no flash no macro and only 2 mp

[jackssmirkingrevenge]

You could also put some Araldite in

[CpTn_lAw]

What type of nailgun is the best in a spudding (kinda) point of view? I mean, what is the most powerful kind of nailgun available?

[rikukiakuchiki777]

EEEEEEEEEEEEPOOOOOOOOOXYYYYYYYYYYY

fixes everything. Just mix some up and pour over the crack. Try not to spill it through the hole, and just rub it into the crack and wipe of the excess. I'm honestly not 100% sure well that would work but its the first thing I would try

[Tobbz]

Yeah what he said up there, epoxy fixes everything

[jackssmirkingrevenge]

May the gods of binary adhesives smile upon you

What type of nailgun is the best in a spudding (kinda) point of view? I mean, what is the most powerful kind of nailgun available?

You can usually tell by how big they are, bigger case means bigger piston and therefore more flow if you'll be using it as a valve.

I had bought the smallest brad nailer I could find and it still had a 25mm or so piston so more than enough flow for a good sized pneumatic.

[POLAND_SPUD]

hmmm
I don't get it... why would anyone buy a nailgun to mod it ? I mean I know it has an inbuilt 3 way valve but it is easier and probably cheaper to use a QEV + 3 way valve instead

[jackssmirkingrevenge]

It's a ready made semi-automatic piston valve complete with trigger and pistol grip you can get for 15 dollars, I can see the appeal to be honest

[Crna Legija]

thanks guys i filled the crack with epoxy last night and will try retap the threads thru the epoxy

i got this nailgun from my dad, it has a 35mm piston

if epoxy don't work can i fill the hole with melted solder and tap that

[jrrdw]

The part that cracked, whats it made of?

[Crna Legija]

aluminium
too short

[CpTn_lAw]

Aren't there combustion nailers? I've heard somewhere that nail-guns can shoot nails up to 1400 fps, was it true?