http://www.harborfreight.com/cpi/ctaf/D ... mber=95012
Probably too small for most members here, but better than nothing
JSR, you could probably import one! gross wt. is only 36 lbs! I calculate $140 for shipping, almost twice the cost of the lathe itself!
$72 micro metal lathe at harbor freight
i-m about to unveil a much cheaper and super affective alternative to buying a lathe. building one. u'll see me post it pretty soon. by the way, this is an awesome find. u would buy it now if i could. but for now i gotta work with what i got.
WHY PAY FOR IT WHEN U CAN MAKE IT?
i did some reasearch and i found the manual that says that if you turn the jaw chucks around you can hold up to a 1 3/4in piece. if that is true then i will very likely buy this as it will fit my piston making need s for many of my projects
-
Lentamentalisk
- Sergeant 3
- Posts: 1202
- Joined: Tue Aug 07, 2007 5:27 pm
- Location: Berkeley C.A.
My god that is tiny. Absolutely microscopic. But I suppose it is perfect for small things.
Do not look back, and grieve over the past, for it is gone;
Do not be troubled about the future, for it has not yet come;
Live life in the present, and make it so beautiful that it will be worth remembering.
Do not be troubled about the future, for it has not yet come;
Live life in the present, and make it so beautiful that it will be worth remembering.
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 344 times
Fork in hell, that would be perfect! Good find, I'll have to check if these are available locally.
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
inonickname
- First Sergeant 4
- Posts: 2606
- Joined: Sun Dec 07, 2008 3:27 am
Wow..I could easily get that in the chuck of my lathe 
It's tiny and of course good for smaller projects only, but I don't know about it's precision. It's not massively expensive though, so it could be useful.
It's tiny and of course good for smaller projects only, but I don't know about it's precision. It's not massively expensive though, so it could be useful.
PimpAssasinG wrote:no im strong but you are a fat gay mother sucker that gets raped by black man for fun
-
Jeeperforlife
- Specialist
- Posts: 108
- Joined: Tue Jan 15, 2008 4:51 pm
Some noob questions.
What could you do with this lathe? Does this have the same functions as a larger one, cutting O ring groves, Cutting threads ect. just on smaller pieces? I have wanted to get one for a wile now and this price point is hard to say no to. I have a harbor freight down the road from me so I can go see it in person and not have to ship it.
If it could do what I need it could come in handy for small high preshure guns.
Marcus
What could you do with this lathe? Does this have the same functions as a larger one, cutting O ring groves, Cutting threads ect. just on smaller pieces? I have wanted to get one for a wile now and this price point is hard to say no to. I have a harbor freight down the road from me so I can go see it in person and not have to ship it.
If it could do what I need it could come in handy for small high preshure guns.
Marcus
-
jrrdw
- Moderator
- Posts: 6572
- Joined: Wed Nov 16, 2005 5:11 pm
- Location: Maryland
- Has thanked: 39 times
- Been thanked: 22 times
- Contact:
You have to be carefull of the numbers advertized when looking for shop machinary.
For instance my 8" X 12" metal lathe. The first number represents the "swing over bed". It states 8"s but you have to cut that in half.
It is really 4"s from the center of the chuck to the bed. The 8" measurment applies to both sides of the chuck, meaning your work piece can be 8"s as long as it mounts to the chuck in the middle.
For instance my 8" X 12" metal lathe. The first number represents the "swing over bed". It states 8"s but you have to cut that in half.
It is really 4"s from the center of the chuck to the bed. The 8" measurment applies to both sides of the chuck, meaning your work piece can be 8"s as long as it mounts to the chuck in the middle.
This lathe would be difficult to cut threads with, but turning smaller stock and cutting o-ring groves would be easily done. It lacks a leed screw and the speed control is electronic, making it hard to cut threads.jeepforlife wrote:What could you do with this lathe? Does this have the same functions as a larger one, cutting O ring groves, Cutting threads ect.
-
daberno123
- Corporal
- Posts: 594
- Joined: Mon Nov 19, 2007 5:56 pm
- Location: Ohio
http://groups.yahoo.com/group/siegc-o/
A yahoo group that specializes in this lathe. Looks alright, but I'd save your money for a mini-lathe...
A yahoo group that specializes in this lathe. Looks alright, but I'd save your money for a mini-lathe...
i am seriously considering buying this and am wondering what kind of tools i need for it. i have dial calipers and stuff but i need the cutting tools
i want to do just simple operations like turning, parting and facing. and boring if possible
i want to do just simple operations like turning, parting and facing. and boring if possible
-
Mr.Sandman
- Corporal 3
- Posts: 762
- Joined: Fri Mar 28, 2008 9:10 am
- Contact:
He he guess who just scored himself a micro lathe for 72 bucks? Im so excited ill review it when it gets here. Now i need some bar stock and tooling.
Yeah, it's that important.
-
Mr.Sandman
- Corporal 3
- Posts: 762
- Joined: Fri Mar 28, 2008 9:10 am
- Contact:
Well thanks for making me feel confident about my purchase your jerk.rp181 wrote:My bet is that the motor is weaklet us know sandman.
I dont think it will be too bad, it better not be i gave up a G&G m14 for this. 
Yeah, it's that important.