PACa Mk.II, French airgun

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
User avatar
Lockednloaded
Staff Sergeant
Staff Sergeant
United States of America
Posts: 1566
Joined: Thu Sep 03, 2009 9:38 pm
Location: Texas, USA
Been thanked: 7 times

Mon Sep 20, 2010 7:17 pm

Wow! very impressive to say the least. I love everything about it, the pump, the piston, and the high pressure.

Your Check Valve seems very compact and well made, any details on its construction?

I think the on thing that would really put this gun over the top is some proper sights. A red-dot or some steel sites would be practical, but a proper scope would look amazing!
I love lamp
User avatar
maverik94
Corporal
Corporal
Posts: 558
Joined: Wed Jan 21, 2009 4:48 pm

Mon Sep 20, 2010 9:27 pm

Hmmmm. I'm liking the spool valve and especially that onboard pump...you could have the QDV activated pneumatically with a schrader valve, blowgun, or even a pushbutton or hammer valve...Anyway. Nice build!
Also, I like how you're wearing gogles and gloves when you're shooting!
Just a thought. You could put a medium-strength spring behind that trigger just so you don't have to push forward the trigger after every shot to reset the valve. Very impressive I must say!
"You can't be friends with anyone if you aren't friends with yourself."
"I'd rather be hated for who I am, than loved for who I'm not." -André Gide
Give me a lever long enough, and a fulcrum on which to place it and I shall move the world.
–Archimedes
Defeat is always momentary.
–Carl Denham

Current Project: None, I'm in Spudremission.
User avatar
G-man
Private 2
Private 2
Posts: 22
Joined: Fri Mar 07, 2008 8:47 am
Location: France

Tue Sep 21, 2010 1:49 pm

@killerbanjo:

I don't thing that I got enough vocabulary to explain you the function of a QDV, so maybe someone of this forum could do it ;)
That said, I think that I'm gonna work on a tutorial for my forum this weekend, and there will be animated schemes, I'll show you.

The pump is quite simple.
-the anti-reversal is made with a schradder valve, on wich I take out the spring. So it opens easily when you pump.
-the piston has been machined from a piece of brass, and the joint has two position: while pushing, it moves back and the piston is airtight.
While pulling, the joint moves up and let the air flow inside the little holes you can see on the picture, so there's no vacuum effect.

This was not the original system, that's why the piston looks strange.



@Lockednloaded:

What do you call "chek-valve" exactly ? I don't understand what it is. The anti-reversal ?
Also, I tried to attach a scope last day, but it's quite difficult...
There's not many possibilities for attachin a rail on this rifle.

@maverik94:

I don't think that using a pneumatic triggering system is a good idea, it would add a lot of pieces and complexity, for an infime gain.
For me, the main interest of this firing system is it's simplicity ! ;)

In fact, there IS a return spring !
But he's not strong enough to push the piston back...
That's not a big problem since it takes about 1min to reload the gun ;)
Patator'Forum admin
http://patator.frbb.net/
(somewhat the "french spudfiles")
User avatar
JDP12
Staff Sergeant 5
Staff Sergeant 5
Posts: 1943
Joined: Fri Mar 30, 2007 8:34 pm

Tue Sep 21, 2010 2:23 pm

Very cool g-man. It has a very appealing look to it as well.

and a check valve is essentially an anti-reverse valve.
User avatar
maverik94
Corporal
Corporal
Posts: 558
Joined: Wed Jan 21, 2009 4:48 pm

Tue Sep 21, 2010 4:25 pm

I don't think that using a pneumatic triggering system is a good idea, it would add a lot of pieces and complexity, for an infime gain.
For me, the main interest of this firing system is it's simplicity !
It's cool. It was just an idea. After all, it would add efficiency, and eliminate the need for a return spring (as the air would act as one), but if you're happy with it, it's perfectly fine! After all, it's your own gun right? :) Anyway, that is a very cool gun you've got there man. i hope to see more from you real soon![/quote]
"You can't be friends with anyone if you aren't friends with yourself."
"I'd rather be hated for who I am, than loved for who I'm not." -André Gide
Give me a lever long enough, and a fulcrum on which to place it and I shall move the world.
–Archimedes
Defeat is always momentary.
–Carl Denham

Current Project: None, I'm in Spudremission.
User avatar
wyz2285
First Sergeant 2
First Sergeant 2
Austria
Posts: 2385
Joined: Sat Mar 06, 2010 7:50 am
Location: Porto, Portugal
Has thanked: 1 time
Been thanked: 3 times
Contact:

Tue Sep 21, 2010 4:26 pm

nice way to quick open a valve :) have think about this to but i thout it hard to build.and it's very cool to have that hp pumb :D
User avatar
maverik94
Corporal
Corporal
Posts: 558
Joined: Wed Jan 21, 2009 4:48 pm

Tue Sep 21, 2010 4:32 pm

Please explain the pump too

Im guessing its a sturrum (Spelling) pump that uses a bought check valve?

I'm guessing you mean a "stirrup pump"?
Here is a how-to page on how they work and how you can make your own. hope that helps :wink:
"You can't be friends with anyone if you aren't friends with yourself."
"I'd rather be hated for who I am, than loved for who I'm not." -André Gide
Give me a lever long enough, and a fulcrum on which to place it and I shall move the world.
–Archimedes
Defeat is always momentary.
–Carl Denham

Current Project: None, I'm in Spudremission.
User avatar
G-man
Private 2
Private 2
Posts: 22
Joined: Fri Mar 07, 2008 8:47 am
Location: France

Tue Sep 21, 2010 4:52 pm

@Maverik94: Uh, I didn't want to seem to reject your proposal without consideration, I'm not saying that you're wrong or whatever else !
I'm just saying that the actual system is way powerful enough for me, I'm not trying to reach the max efficiency by adding pneumatic mods ;)
I have a preference for mecanichs systems too, I don't like the feeling of a pneumatic trigger.
Sorry if I offended you in any way, my level in english writing doesn't allow me a lot of nuance in my words...

The pump in your link makes me think of my first HP pump !
http://i87.servimg.com/u/f87/11/27/23/97/116.jpg


Here's a quick schematic of my pump:
Image

The little yellow thing in the middle is, as I said, a schradder valve, on wich I take off the spring so make it much easier to pump.
Patator'Forum admin
http://patator.frbb.net/
(somewhat the "french spudfiles")
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 8 times

Tue Sep 21, 2010 5:48 pm

maverik94 wrote:Hmmmm. I'm liking the spool valve and especially that onboard pump...you could have the QDV activated pneumatically with a schrader valve, blowgun, or even a pushbutton or hammer valve...Anyway. Nice build!
If it were pneumatically modified then it would no longer be a QDV, it would be a normal piston valve, and I believe you would lose power. I think Technician1002 would agree.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna"M16 BBMGPengunHammer Valve Airsoft SniperHigh Pressure .22 Coax
Holy Shat!
User avatar
maverik94
Corporal
Corporal
Posts: 558
Joined: Wed Jan 21, 2009 4:48 pm

Tue Sep 21, 2010 7:40 pm

Uh, I didn't want to seem to reject your proposal without consideration, I'm not saying that you're wrong or whatever else !
I'm just saying that the actual system is way powerful enough for me, I'm not trying to reach the max efficiency by adding pneumatic mods Wink
I have a preference for mecanichs systems too, I don't like the feeling of a pneumatic trigger.
Sorry if I offended you in any way, my level in english writing doesn't allow me a lot of nuance in my words...
Nonono. you didn't offend me in the slightest! :) As I said, it's your gun, and if it's doing what you want it to, then there's absolutely no reason to change/modify it.
If it were pneumatically modified then it would no longer be a QDV, it would be a normal piston valve, and I believe you would lose power. I think Technician1002 would agree.
Idk...I think as long as there was minimal dead volume and an efficient pilot valve, you could get a considerably faster opening time...though I can't prove it, that would be my guess though. Does anyone know for sure?
"You can't be friends with anyone if you aren't friends with yourself."
"I'd rather be hated for who I am, than loved for who I'm not." -André Gide
Give me a lever long enough, and a fulcrum on which to place it and I shall move the world.
–Archimedes
Defeat is always momentary.
–Carl Denham

Current Project: None, I'm in Spudremission.
User avatar
killerbanjo
Specialist 2
Specialist 2
Posts: 245
Joined: Fri Jun 18, 2010 6:56 pm

Tue Sep 21, 2010 7:51 pm

G-man wrote:The pump is quite simple.
-the anti-reversal is made with a schradder valve, on wich I take out the spring. So it opens easily when you pump.


-the piston has been machined from a piece of brass, and the joint has two position: while pushing, it moves back and the piston is airtight.
While pulling, the joint moves up and let the air flow inside the little holes you can see on the picture, so there's no vacuum effect.

This was not the original system, that's why the piston looks strange.

Thanks for that, the tutorial sound great, be sure to post a tutorial when your done.

Just want to say again how much i love your gun :P
User avatar
Ragnarok
Captain
Captain
Posts: 5401
Joined: Tue Dec 19, 2006 8:23 am
Location: The UK

Tue Sep 21, 2010 8:01 pm

Gun Freak wrote:If it were pneumatically modified then it would no longer be a QDV, it would be a normal piston valve, and I believe you would lose power.
I'm sorry, but no. All credit to Tech - the QDV does meet the criteria of having a faster opening time than a conventional piston valve, but the effect that has on final muzzle energy will be imperceptible.

As I have said many times, improving opening time has diminishing returns, and well made piston valves are almost invariably past that point.
A QDV has advantages (and some disadvantages to go with it - there are no free lunches), but these aren't really in the realm of performance, regardless of what popular opinion might think.

TL;DR* - Piston valves and QDVs are almost identical as far as power. Don't use it as a reason to choose between them.
*If so, smack yourself in the head for being a bloody lazy git. That was only a short post.
Does that thing kinda look like a big cat to you?
User avatar
maverik94
Corporal
Corporal
Posts: 558
Joined: Wed Jan 21, 2009 4:48 pm

Tue Sep 21, 2010 8:06 pm

How would a QDV have a faster opening time? As I see it, when you're pulling open the QDV with your finger as in this gun, you are opening it with, say, a max of 30 lbs of force. And if you had a pneumatically actuated valve with 400 lbs of pressure it would have ~ 400 lbs of force pushing it open (depending on the seat diameter, etc). Wouldn't that give you a much faster opening time? Or is my logic totally messed up and am i making a fool of myself lol :D
"You can't be friends with anyone if you aren't friends with yourself."
"I'd rather be hated for who I am, than loved for who I'm not." -André Gide
Give me a lever long enough, and a fulcrum on which to place it and I shall move the world.
–Archimedes
Defeat is always momentary.
–Carl Denham

Current Project: None, I'm in Spudremission.
User avatar
saefroch
Staff Sergeant 2
Staff Sergeant 2
Posts: 1679
Joined: Mon Jun 08, 2009 8:47 am
Location: U.S.A.- See Map

Tue Sep 21, 2010 8:20 pm

A QDV has no pilot valve. You're assuming instant opening time on the pilot valve with your estimation. A normal piston valve also has some resistance to the piston moving back produced by the not-yet-vented pilot volume, a QDV does not. GGDT actually models all these effects, if you punch in a piston valve at like 1,000 psi and look at the graph of valve opening speed, you can see the slope of the line change. You're not making a fool of yourself, as Rag said, there's almost no difference in the final product.
User avatar
maverik94
Corporal
Corporal
Posts: 558
Joined: Wed Jan 21, 2009 4:48 pm

Tue Sep 21, 2010 8:23 pm

A QDV has no pilot valve. You're assuming instant opening time on the pilot valve with your estimation. A normal piston valve also has some resistance to the piston moving back produced by the not-yet-vented pilot volume, a QDV does not. GGDT actually models all these effects, if you punch in a piston valve at like 1,000 psi and look at the graph of valve opening speed, you can see the slope of the line change. You're not making a fool of yourself, as Rag said, there's almost no difference in the final product.
Ok, I gotcha, so they're pretty much the same as far as performance goes. I gotcha.
"You can't be friends with anyone if you aren't friends with yourself."
"I'd rather be hated for who I am, than loved for who I'm not." -André Gide
Give me a lever long enough, and a fulcrum on which to place it and I shall move the world.
–Archimedes
Defeat is always momentary.
–Carl Denham

Current Project: None, I'm in Spudremission.
Post Reply