Solenoid Valve for T-Shirt Cannon
- POLAND_SPUD
- Captain
- Posts: 5402
- Joined: Sat Oct 13, 2007 4:43 pm
- Been thanked: 1 time
heh... that's pretty clever
Children are the future
unless we stop them now
unless we stop them now
- Technician1002
- Captain
- Posts: 5189
- Joined: Sat Apr 04, 2009 11:10 am
I looked up the dimensions of a basketball court. My 70 foot guess was a little high. They are launching from near center court and going 1/2 court to the wall. The distance is about 50 feet. The outdoor range looks to be a little farther, but I'm sure it is less than 150 Feet.MrCrowley wrote:They probably regged the pressure down or changed the timing on the valves to limit flow. I imagine it's not so fun catching t-shirts bouncing off the walls
edit: Their 'first test' video seems to be shooting them closer to 100yards, hard to tell. 150 yards does seem like a stretch with that valve unless they can push the pressure above 150PSI (which doesn't seem likely if their reg only goes as high as 150PSI) and/or increase the valve dwell time.
My Marshmallow Cannon tosses shirts 200 feet at 100 PSI. That is without a valve with a low CV and hose between the valve and barrel.
- MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
The point of my previous post was no to second guess your range judgement but to add that they probably regged the pressure down in the cannon and/or changed the dwell time of the valve so they would not over-shoot the basketball court.
Without knowing the dwell time of the valve and the pressure the cannon is regulated to for a particular shot, it would be difficult to estimate accurate range distances at the cannon's full potential.
Without knowing the dwell time of the valve and the pressure the cannon is regulated to for a particular shot, it would be difficult to estimate accurate range distances at the cannon's full potential.