Nah, it wont kill you. Unless you have a pacer maker or something like that.
The spark looks much smaller now, When I wrote that I was using it at night time and it looked alot bigger. But still, its cool.
Its just a capacitor attached to a AA battery. You charge it up for about 5 seconds then touch the wires.
Stun Gun
-
carlbelcher
- Corporal
- Posts: 532
- Joined: Mon Jun 12, 2006 6:54 pm
With a transformer that takes the 1.2 volts from a battery and ramps it up to about 1000 - 4000 volts....Its just a capacitor attached to a AA battery. You charge it up for about 5 seconds then touch the wires.
Remember it's not the voltage that kills, it's the amperage.
So when you take 1.2 volts at lets say 1 amp and transform it to say 1200 volts you only get 1 mA or one thousandth of an amp... It takes about 65 mA across the heart to kill.
Is your Google.com Broken?!
-
Jolly Roger
- Specialist 2
- Posts: 210
- Joined: Fri Aug 25, 2006 4:20 am
-
killagorrila99
- Sergeant 2
- Posts: 1100
- Joined: Tue Jul 25, 2006 2:35 am
- Location: Australia.
um wasnt this posted in 2005? wow its dead
"I'm sorry, Mr.Bush cant come to the phone right now, He's playing cleudo with Mr. Cheney And he has him in the Cupboard with a broom stick" -White house receptionist.
-
carlbelcher
- Corporal
- Posts: 532
- Joined: Mon Jun 12, 2006 6:54 pm
If you can't get a stun gun you could check out these kits.
http://www.amazing1.com/hv-dc-power-supplies.htm
you could also try using an automotive coil.
killagorrila99 you can kick up dead topics if you have something useful to say or a question to ask.
http://www.amazing1.com/hv-dc-power-supplies.htm
you could also try using an automotive coil.
killagorrila99 you can kick up dead topics if you have something useful to say or a question to ask.
Is your Google.com Broken?!
-
Jolly Roger
- Specialist 2
- Posts: 210
- Joined: Fri Aug 25, 2006 4:20 am
Cheers mate, I'll be looking into them...
-
carlbelcher
- Corporal
- Posts: 532
- Joined: Mon Jun 12, 2006 6:54 pm
Not normally, they run about 20K - 50K volts, some stun gun go up to 900K volts. But be extra careful with automotive coils what they lack in voltage they make up for in amperage (amps are what kills you).
Is your Google.com Broken?!
-
zeigs spud
- Corporal 2
- Posts: 657
- Joined: Tue Apr 04, 2006 10:39 pm
wow that was very interesting. i'd be scared of having that much electricity goin thru meh but i don't have to worry, my parents would never allow it...
on my spudgun, i had multiple spar points, i covered all of the exposed metal with jb weld(looks cleaner than tape) but i left two exposed for the stun gun, stun guns are the most expensive part of a combustion cannon, might as well be able to use it on multiple cannons. its kinda like the guy with the slow burnin fuses on on the first cannons, cept its a stungun 
Another ignition source is the good old flyback transformer that is used in tv's and CRT computer monoters. They are everywhare but you need to know alot about electronics. Also it is usually very hard to find pinouts of the flyback trnasformers.
But apart from all that - its a really cheap form of a taser and you can get the readaly available in Aust.
you get around 20,000kva or more from a 15v powersource. this equartes to around a 2cm spark that should be planty for a spudgun.
have fun but be safe with electricity !
Wipsomass
But apart from all that - its a really cheap form of a taser and you can get the readaly available in Aust.
you get around 20,000kva or more from a 15v powersource. this equartes to around a 2cm spark that should be planty for a spudgun.
have fun but be safe with electricity !
Wipsomass
-
runningawaypyro
- Private 3
- Posts: 42
- Joined: Tue Aug 29, 2006 5:58 pm
so what i want to know is how i can make these operational from a distance.
so i have a sg. i pop it open and cut the wire going to and from the switch. then i lengthen the wires.
but wouldn't the longer wires lower the electric level due to resistance? makeing the perfomance of the sg probably not functional.
people were talking about doing something in "relay".
Im sorry but im not to familair with that term. unless your talking about a race.
how can i make a switch that will set off the switch of the sg from a distance?
so i have a sg. i pop it open and cut the wire going to and from the switch. then i lengthen the wires.
but wouldn't the longer wires lower the electric level due to resistance? makeing the perfomance of the sg probably not functional.
people were talking about doing something in "relay".
Im sorry but im not to familair with that term. unless your talking about a race.
how can i make a switch that will set off the switch of the sg from a distance?
Yes he sells them, If you are in a country that stun guns are illegal, buy one from sgort (launchpotatoes.com) Thats what I did and I live in Canada.frankrede wrote:I believe its gort who sells custom control boxes for stun gun ignitiona dn they can have a wireless remote.
The circuitry for the stun gun isn't illegal and he sells them.
-
zeigs spud
- Corporal 2
- Posts: 657
- Joined: Tue Apr 04, 2006 10:39 pm
PCGUY wrote:Same here... my mom thinks i'll go around and stun people if I got one.
one wordtheexp wrote:I wish my parents would let me get one...
....
EBAY
lol
just buy one on ebay for liek 25-35 bucks and hide it.
which is why i say EBAYzeigs spud wrote:wow that was very interesting. i'd be scared of having that much electricity goin thru meh but i don't have to worry, my parents would never allow it...
