.A month ago I found a blowgun, with only the valve part functional
, so I decided to build a hammer valve gun, hoping to get multiple shots from it.In able to keep it powerful enough, I needed it to be leak free with high pressure(something like 600-800 psi) , so I made it as simple as possible, just chamber+valve section of the blowgun, connected together with a aluminum tube covered with fiberglass.
When finished I found out the the gun is just amazing
, the hammer valves far better than I thought(I thought they opens slow like a blowgun or ball valve), with 700 psi the bb can hits a 3/4 pvc tube at 60m(a little bit of luck is needed 
), and I´m able to get 5-6 nice shots from that tiny chamber , so I mounted a 12 round magazine to it,bolt action breech load, works smoothly 8) .Stock made from wood, adjustable supports
4x20 scope for now, will buy a better one.The suppressor works REALLY well, before when I shot the gun it scares all the neighbors, now I can shot it inside my house without disturbing my parents
, and it does not affect the accuracy at all . Tutorial for the valve+trigger at: http://www.spudfiles.com/forums/hammer- ... 23202.html
[youtube][/youtube][/youtube]
.
