Extremely board need help.
Hello me and my mate Zane have school holes right now and are board. We have like 130 glass houses that where demolishing on our property. So could some one tell me how to make a simple potato launcher with a pipe, aerosol can and a BBQ sparker please? i was told that's all i need but don't no how to assemble or work it.
-
Kris.Is.Awesome
- Private 4
- Posts: 72
- Joined: Tue Jul 11, 2006 2:52 pm
- Location: Virginia Beach, VA
- Contact:
Then don't do it.
It's not safe.
It's not safe.
I'm going to be vague just to show that you really need to look it up.
The potato goes in the pipe, aerosel behind the potato, sparker goes in the pipe, sparker ignites aerosel.
The potato goes in the pipe, aerosel behind the potato, sparker goes in the pipe, sparker ignites aerosel.
"There isn't a problem in the world that can't be solved by the proper application of explosives"
-
singularity
- Corporal 5
- Posts: 982
- Joined: Mon Jun 26, 2006 10:53 pm
- Location: someplace
- Contact:
i think you will find <a href="http://www.justfuckinggoogleit.com/">this site</a> very helpful
be sure to check out my <a href="http://www.spudfiles.com/forums/ak-styl ... 9.html">AK Styled Vortex Gun</a> and my <a href="http://www.spudfiles.com/forums/at-4-t9627.html">AT-4 Rocket</a>
upcoming projects... finalized clip fed BBMG and ball point pen sniper
upcoming projects... finalized clip fed BBMG and ball point pen sniper
-
MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
you have school holidays now!!!where do you live?
ok quickly how to make a combustion.
50mm(1 1/2")pvc pipe(dwv or pressure pipe,as long as you dont use propane you should be fine using dwv)
80mm(3") pvc pipe dwv or pressure(dont use spouting/down pipe!)
50mm-80mm reducer
80mm end cap
latern lighter/bbq igniter
Key:
------ = barrel
=== = chamber
+ = reducer
| = end cap adapter and end cap
----------------------------------------------+===================|
----------------------------------------------+===================|
prime and glue the 50mm(barrel) pipe to the 50mm-80mm reducer
prime and glue the barrel and reducer to the 80mm pipe(chamber)
prime and glue a end cap adapter to the chamber
install the ignitor/sparker
ok quickly how to make a combustion.
50mm(1 1/2")pvc pipe(dwv or pressure pipe,as long as you dont use propane you should be fine using dwv)
80mm(3") pvc pipe dwv or pressure(dont use spouting/down pipe!)
50mm-80mm reducer
80mm end cap
latern lighter/bbq igniter
Key:
------ = barrel
=== = chamber
+ = reducer
| = end cap adapter and end cap
----------------------------------------------+===================|
----------------------------------------------+===================|
prime and glue the 50mm(barrel) pipe to the 50mm-80mm reducer
prime and glue the barrel and reducer to the 80mm pipe(chamber)
prime and glue a end cap adapter to the chamber
install the ignitor/sparker
