One more quick question: What software are you using on your host computer? Printrun (Pronterface), Repetier-Host, etc? (What program do you open to control the printer).
EDIT: Actually, having a look through my Configuration.h, I do have quite a few entries relating to the heated bed. It might be worth checking with the site you purchased your printer from to see if they have a version of the firmware for your printer with a heated bed. If that's the case, you simply copy the values from your original Configuration.h to the new Configuration.h while taking note of the additions in the firmware.
Mr. Fusion - Custom Designed 3D Printer
-
wyz2285
- First Sergeant 2
- Posts: 2388
- Joined: Sat Mar 06, 2010 7:50 am
- Location: Porto, Portugal
- Has thanked: 1 time
- Been thanked: 4 times
- Contact:
None, tried repetier- host but didn't work, the printer reads G-code from a memory card
CpTn_lAw wrote:"yay, me wanna make big multishot pnoob with 1000 psi foot pump compressor using diamond as main material. Do you think wet bread make good sealant? "
Okay, if you are running it headless, then you probably will have to change some stuff in the firmware. I don't have have the LCD configured in my own firmware, so I'm afraid I won't be much help. At least you are on the right track with the connections and the hardware end of things.
-
wyz2285
- First Sergeant 2
- Posts: 2388
- Joined: Sat Mar 06, 2010 7:50 am
- Location: Porto, Portugal
- Has thanked: 1 time
- Been thanked: 4 times
- Contact:
Well hope is as simple as turning the hotbed option in the configuration true and define the temperature.
CpTn_lAw wrote: