Finally did it...
i was thinkin wtf, the halmatro tools we have (aka hydraulic tools) are heavy like minimum 50 pounds. No one whos 61 on average is doing that safely...
(\__/)
(O.o)
(> <)
This is Bunny. Copy Bunny into your signature to help him on his way to world domination.
www.Jerichofd.com
www.Hobbytimeny.com
(O.o)
(> <)
This is Bunny. Copy Bunny into your signature to help him on his way to world domination.
www.Jerichofd.com
www.Hobbytimeny.com
LOL 90 seconds to get out for a call? yea ok. Thats a paid fire department maybe. Do you realize how fast 90 seconds is? A volunteer fire department, people are usually at their house and if they get a call on the pager they hop in the car, turn on the warning lights and come to the department. The only time it would take 90 seconds is if there was a previous call and all the fireman happened to still be hanging out at the firehouse.
But think about it.. a minute and a half to get dressed, get seated on the truck (you dont just sit anywhere, each seat on the truck dignifies a different job)
That 90 seconds is lightning speed.
But think about it.. a minute and a half to get dressed, get seated on the truck (you dont just sit anywhere, each seat on the truck dignifies a different job)
That 90 seconds is lightning speed.
(\__/)
(O.o)
(> <)
This is Bunny. Copy Bunny into your signature to help him on his way to world domination.
www.Jerichofd.com
www.Hobbytimeny.com
(O.o)
(> <)
This is Bunny. Copy Bunny into your signature to help him on his way to world domination.
www.Jerichofd.com
www.Hobbytimeny.com
i just had a training on the saws. The monster gas circular and chain saws for venting roofs... So sick... We just cut up like 4 sheets up plywood on top of wood pallets (to simulate a roof) I got to use a like 25 pound gas powered carbide blade circular saw, this thing if it touches your body, its getting chopped. The other saw i used was a diamond tipped carbide tooth ventmaster chainsaw.
Heres the circular saw i used
http://www.brushtruck.com/Secure/ecomme ... p?prdn=507
and heres the ventmaster chainsaw
http://www.thefirestore.com/store/category.cfm?cID=1310
The chainsaw was way more fun.
Both of them were simply nasty...
by the way, the chainsaw cost a bit over $2000 and the chains for it are about $220. Love for the taxpayers.
Heres the circular saw i used
http://www.brushtruck.com/Secure/ecomme ... p?prdn=507
and heres the ventmaster chainsaw
http://www.thefirestore.com/store/category.cfm?cID=1310
The chainsaw was way more fun.
Both of them were simply nasty...
by the way, the chainsaw cost a bit over $2000 and the chains for it are about $220. Love for the taxpayers.
(\__/)
(O.o)
(> <)
This is Bunny. Copy Bunny into your signature to help him on his way to world domination.
www.Jerichofd.com
www.Hobbytimeny.com
(O.o)
(> <)
This is Bunny. Copy Bunny into your signature to help him on his way to world domination.
www.Jerichofd.com
www.Hobbytimeny.com
- Flying_Salt
- Corporal 3
- Posts: 779
- Joined: Mon Oct 09, 2006 4:57 pm
- Location: Texas
Wow nice truck. Good luck on your career and everything. Don't die on us.
I got initiated by the other guys.... unoficially.
Basically, what you see in movies like ladder 49 where they have the bs joke they play on him, well i got a swirly, like an actual one from like 3 of the other guys. Yes it was clean, they cleaned it to be nice before doing it...
Basically, what you see in movies like ladder 49 where they have the bs joke they play on him, well i got a swirly, like an actual one from like 3 of the other guys. Yes it was clean, they cleaned it to be nice before doing it...
(\__/)
(O.o)
(> <)
This is Bunny. Copy Bunny into your signature to help him on his way to world domination.
www.Jerichofd.com
www.Hobbytimeny.com
(O.o)
(> <)
This is Bunny. Copy Bunny into your signature to help him on his way to world domination.
www.Jerichofd.com
www.Hobbytimeny.com
Lol
Cleaned or not I'm not doing a toilet brush impression for anyone
I wonder if the kevlar fibre stuffed chainsaw trousers you're meant to wear for normal chainsaws would work on a carbide tipped one...
The fibres aren't meant to get cut but get dragged out by the chain and jam the sprocket....
Any volunteers to find out?
Cleaned or not I'm not doing a toilet brush impression for anyone
I wonder if the kevlar fibre stuffed chainsaw trousers you're meant to wear for normal chainsaws would work on a carbide tipped one...
The fibres aren't meant to get cut but get dragged out by the chain and jam the sprocket....
Any volunteers to find out?
Yea odds are they would work. The concept behind those is that theres just so much in there that they clog the chain like you said. i would think it would give you one pissy day tho when you try to get them out of the saw... regardless of it saving you from getting hurt, u will be anoyed as fuck im sure.
(\__/)
(O.o)
(> <)
This is Bunny. Copy Bunny into your signature to help him on his way to world domination.
www.Jerichofd.com
www.Hobbytimeny.com
(O.o)
(> <)
This is Bunny. Copy Bunny into your signature to help him on his way to world domination.
www.Jerichofd.com
www.Hobbytimeny.com