Please i`m really new... i really nid help .. :'(
hi i`m new to all this spud thing so is anyone kind enough to teach me or tell me websites that teach how to make a airgun (a.k.a Air SoftGun) and a spud gun please ? i`ve watch videos on youtube but i still don`t really get the whole idea... thanx everyone ! =) have a pleasant day
-
Mr.Taterhead
- Private 2
- Posts: 34
- Joined: Sat Sep 23, 2006 8:51 pm
- Location: London KY
-
zeigs spud
- Corporal 2
- Posts: 657
- Joined: Tue Apr 04, 2006 10:39 pm
not really. thats just mre pics man.
if you really wana know bout spud cannons go here for sure!
http://www.spudfiles.com/spud_wiki/inde ... =Main_Page
(AKA- spud Wiki button at the top right of the screen of the site!
)
hope you get into them!
if you really wana know bout spud cannons go here for sure!
http://www.spudfiles.com/spud_wiki/inde ... =Main_Page
(AKA- spud Wiki button at the top right of the screen of the site!
) hope you get into them!
-
jack_the_hack
- Private
- Posts: 11
- Joined: Mon Nov 28, 2005 6:14 pm
Hey man you dont have to use all the bells and whistles for your first spudgun. heh heh, i still use my first launcher which is the most primitive pneumatic you can ever build (well i think at least). here is what it consists of:
5 foot long, 2 inch diameter schedule 40 pipe = tank
5 foot long,1 and 1/2 diameter schedule 40 pipe = barrel
2 inch, schedule 40 ball valve = valve
2 inch, to 1 and 1/2 inch flush bushing = reducer
1 and 1/2 inch female thread cleanout adaptor
1 and 1/2 inch male thread adaptor
threaded schrader valve (recomended)
or
1/4 inch ball valve, 1/4 inch nippel,and an air compressor fitting
-------------------------------------------------------------------------------------
If you want plans or pics just pm me.
_____________________________________________________________
Fancy sprinkler valves? No just some elbow grease,a quick hand, and a 2" ball valve wallops just fine.......... 8)
JaCk_ThE_HaCk........AKA.......HaCk3r
5 foot long, 2 inch diameter schedule 40 pipe = tank
5 foot long,1 and 1/2 diameter schedule 40 pipe = barrel
2 inch, schedule 40 ball valve = valve
2 inch, to 1 and 1/2 inch flush bushing = reducer
1 and 1/2 inch female thread cleanout adaptor
1 and 1/2 inch male thread adaptor
threaded schrader valve (recomended)
or
1/4 inch ball valve, 1/4 inch nippel,and an air compressor fitting
-------------------------------------------------------------------------------------
If you want plans or pics just pm me.
_____________________________________________________________
Fancy sprinkler valves? No just some elbow grease,a quick hand, and a 2" ball valve wallops just fine.......... 8)
JaCk_ThE_HaCk........AKA.......HaCk3r
