Hi I have not built a cannon and am going to start I am going for a 10' cannon and want to know whats a better & efficiant ratio
7' Barrel and 3' Chamber
6' Barrel and 4' Chamber
any others?
Barrel & Chamber Ratios
- joannaardway
- Corporal 5
- Posts: 949
- Joined: Mon Oct 09, 2006 4:57 pm
- Location: SW Hertfordshire, England, UK.
It depends on your chamber and barrel diameters, and your fuel.
So: What ID (internal diameter) are you going to use for your chamber/barrel
And: what fuel are you going to use?
Oh yeah - don't ever use hairspray. It gunks up the chamber. Use a different spray instead (but not one that can damage the plastic), or propane.
So: What ID (internal diameter) are you going to use for your chamber/barrel
And: what fuel are you going to use?
Oh yeah - don't ever use hairspray. It gunks up the chamber. Use a different spray instead (but not one that can damage the plastic), or propane.
-
- Private
- Posts: 5
- Joined: Tue Oct 31, 2006 10:55 am
probably 2.5" barrel and 3" chamber I dont know what fuel but what I am asking is what should I use for C:B
- joannaardway
- Corporal 5
- Posts: 949
- Joined: Mon Oct 09, 2006 4:57 pm
- Location: SW Hertfordshire, England, UK.
If you are using a spray can, then you'll need a chamber about 1.5 times the volume of your barrel.
If you are using metered propane, then having a chamber about .8 times the volume of your barrel is more efficent.
As this is a ratio, the common factor of pi can be expelled from both of the volume equations.
If you are using metered propane, then having a chamber about .8 times the volume of your barrel is more efficent.
As this is a ratio, the common factor of pi can be expelled from both of the volume equations.
-
- First Sergeant 3
- Posts: 2400
- Joined: Wed Oct 18, 2006 11:12 pm
- Has thanked: 2 times
- Been thanked: 10 times
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.
Last edited by SpudBlaster15 on Wed Jul 14, 2021 11:31 am, edited 1 time in total.
-
- Private
- Posts: 5
- Joined: Tue Oct 31, 2006 10:55 am
I guess I will go with 7' barrel and 3' chamber with diameters of 2.5" for spuds and tennis balls and 3" for the chamber only question is where do I get the pvc, like what store? will they let you buy if they know it is for a cannon?
-
- Private
- Posts: 5
- Joined: Tue Oct 31, 2006 10:55 am
you mean 7' barrel and 4' chamber?
then where can I buy the pipe what kind of hardware store
then where can I buy the pipe what kind of hardware store
Try Lowes and Home Depot, I have the luxury of a really cheap plumbing supply house near me.
Whoever appeals to the law against his fellow man is either a fool or a coward.
Whoever cannot take care of themself without that law is both.
For a wounded man shall say to his assailant,
'If I live, I will kill you. If I die, You are forgiven.'
Such is the rule of honor.
Whoever cannot take care of themself without that law is both.
For a wounded man shall say to his assailant,
'If I live, I will kill you. If I die, You are forgiven.'
Such is the rule of honor.