How To Make A - Micro Gun - Very Easy

A place for general potato gun questions and discussions.
_Hell_Storm_
Private
Private
Posts: 17
Joined: Tue Mar 21, 2006 8:36 pm

Wed Mar 22, 2006 11:45 am

i made a micro gun it is powerful for a mini gun i also decided to share with you all how i made it this link will show you how to make 1 http://www.freewebs.com/micro-gun easy to make,

here is a picture of my Micro Gun:

Image
Last edited by _Hell_Storm_ on Wed Mar 22, 2006 1:12 pm, edited 2 times in total.
_Hell_Storm_
Private
Private
Posts: 17
Joined: Tue Mar 21, 2006 8:36 pm

Wed Mar 22, 2006 11:54 am

anyone know wat is best to use in mini guns i used lynx but my gun hardly fires only sometimes the gun always has a spark i int using to much and i tryed little more and little less just cant get it right
User avatar
Rambo
Corporal
Corporal
Posts: 509
Joined: Sun Jan 15, 2006 2:07 pm

Wed Mar 22, 2006 12:10 pm

O2 and alkohol is the best fuel fir minis.But not without glasses.
jeraldcyc
Private 2
Private 2
Posts: 22
Joined: Tue Oct 17, 2006 9:47 am

Tue Oct 17, 2006 10:01 am

er guys what is a lighter genarator ?care to tell ?
User avatar
Flying_Salt
Corporal 3
Corporal 3
Posts: 779
Joined: Mon Oct 09, 2006 4:57 pm
Location: Texas

Sun Oct 22, 2006 7:57 pm

jeraldcyc wrote:er guys what is a lighter genarator ?care to tell ?
A sparker, for mini ones, one would opt to dissect a long nosed lighter and taking the sparker out.
jeraldcyc
Private 2
Private 2
Posts: 22
Joined: Tue Oct 17, 2006 9:47 am

Mon Oct 23, 2006 9:20 am

erm care to draw or show pics on how it looks like ?it`ll be of great help =p!
User avatar
Flying_Salt
Corporal 3
Corporal 3
Posts: 779
Joined: Mon Oct 09, 2006 4:57 pm
Location: Texas

Fri Oct 27, 2006 10:13 am

Sure it might look something like this
Attachments
Showing the screws
Showing the screws
Here it is rigged to a mini
Here it is rigged to a mini
Put the big thing in that copper cup thing (1) then the wires should be near each other, or connected to something metal (like screws) close enough to make a spark. Then push the button (3)
Put the big thing in that copper cup thing (1) then the wires should be near each other, or connected to something metal (like screws) close enough to make a spark. Then push the button (3)
A Happy Camper
Private
Private
Posts: 7
Joined: Wed Nov 08, 2006 10:43 am

Wed Nov 08, 2006 12:17 pm

do the screws go only partly through or touching the other side of the pill bottle?
How much hair spray do you need like 1-3 mL?
User avatar
MisterSteve124
Corporal 3
Corporal 3
Posts: 702
Joined: Sat Feb 11, 2006 10:11 pm
Location: West Chester, PA
Contact:

Wed Nov 08, 2006 3:12 pm

the screws go into the bottle and they just stay close enough for a spark to go across. As long as they are close enough inside the bottle than they will spark across. For pill bottles you don't need much at all. You need to play with it a little bit and see how much is good. For mine I just spray a quick tap like 1 second and blow into it a little bit to get some air in it. If you spray too much there won't be enough air for it to ignite.
User avatar
schmanman
Staff Sergeant 2
Staff Sergeant 2
Posts: 1685
Joined: Sat Mar 25, 2006 12:28 pm
Location: Michigan,U.S.A
Contact:

Wed Nov 08, 2006 3:37 pm

the link didn't work (is that just my stupid computer?)
Persistence is a measure of faith in yourself
User avatar
ammosmoke
Sergeant
Sergeant
Posts: 1011
Joined: Wed Sep 27, 2006 10:57 am

Mon Nov 13, 2006 7:17 pm

Its just your "stupid"computer, it works on mine just fine.

http://www.freewebs.com/micro-gun/

Try this, maybe it will work for some reason.
Post Reply