I just woke up one day about a week ago and thought "hey, I think I'll make a mini," and, half an hour later I ended up with this.
I've made guns before but they were all hose-clamps-and-duct-tape pneumatics (they did work well though), so this is technically my first combustion too.
The barrel is really a piece of hula-hoop that just happens to be the right diameter for marbles, and the chamber is a 24 cubic inch parsley canister.
I put a refillable butane container in the handle so I can just press a button on the back to inject gas.
The handle also opens and the spark unit can be popped out easily when it dies.
I haven't really tested it for range and velocity yet. Marbles generaly don't go through drywall, but ball bearings and AA batterys will punch holes in it easily.
Comments are welcome.
>Update 3-11-07:
Gun blew up, result of tight fitting marble+perfect mix+weak spot formed in the front of the chamber. Gave a nice bang and the scope popped off, which was kinda funny.
I'll repair it once I find another parsley container.
First mini
-
Fnord
- First Sergeant 2
- Posts: 2239
- Joined: Tue Feb 13, 2007 9:20 pm
- Location: Pripyat
- Been thanked: 1 time
- Contact:
- Attachments
-
- the apple was shot with a ball bearing
- dmg.jpg (37.24 KiB) Viewed 5498 times
-
- pic of the ignition in a dark room
- flash.jpg (14.42 KiB) Viewed 5498 times
-
-
- (slight camera distortions)
-
- Updated pic with laser, scope and silencer
Last edited by Fnord on Sun Mar 11, 2007 4:40 pm, edited 2 times in total.
-
experament-u2
- Specialist 4
- Posts: 469
- Joined: Tue Dec 26, 2006 11:18 pm
thats an awsome mini i love the see through chamber greatjob and nice damage
-
medievalman
- Specialist 3
- Posts: 319
- Joined: Tue Dec 05, 2006 5:52 pm
- Location: Central Minnesota
- Contact:
it's fantastic! nice job with the fuel injection too.
Join the AirAssault Army!
Welcome to Minnesota, Land of 10,000 Lakes, and 10,000,000,000 Mosquitoes.
Welcome to Minnesota, Land of 10,000 Lakes, and 10,000,000,000 Mosquitoes.
-
TwitchTheAussie
- Corporal 5
- Posts: 980
- Joined: Tue Feb 06, 2007 3:23 am
Dude absolutely beautiful. Great job!
-
Fnord
- First Sergeant 2
- Posts: 2239
- Joined: Tue Feb 13, 2007 9:20 pm
- Location: Pripyat
- Been thanked: 1 time
- Contact:
Thank you all for the positive comments. I look forward to posting more cannons when spring comes around(I'm pretty much stuck with small indoors stuff over the winter).
I might try making a mini hybrid from some steel pipe I have laying around over the next month or so. I'm trying to get acquainted with all types of cannons before I start building big.
I might try making a mini hybrid from some steel pipe I have laying around over the next month or so. I'm trying to get acquainted with all types of cannons before I start building big.
Nice gun! 9/10 Is there a lot of kick-back?
-
spudthug
- Corporal 5
- Posts: 936
- Joined: Mon Feb 26, 2007 9:02 pm
- Location: johnsonburg, Pa USA
- Contact:
wow that is a sweet design.....i have been looking for one exactly like this...you dont mind if i build it do you???oh and i like the ignition in a dark room how did you capture it???video camera then still shot?
-
Fnord
- First Sergeant 2
- Posts: 2239
- Joined: Tue Feb 13, 2007 9:20 pm
- Location: Pripyat
- Been thanked: 1 time
- Contact:
I don't mind at all... post it if you build it.
For the ignition picture I clamped the gun in a vice and used the shutter speed adjustment on my digital camera to keep the shutter open while the butane burned.
For the ignition picture I clamped the gun in a vice and used the shutter speed adjustment on my digital camera to keep the shutter open while the butane burned.
start your own thread mate take some pics and im sure you will find help.ewohkoda wrote:
hey im currently makind a mini using a hollowed-out expo marker as the chamber, but i cant figure out a cap or a plug to use in the back of it. any hints? Embarassed.
peace
chaos
