Modding A Sprinkler Valve

PVC Arsenal 17 · Wed Feb 28, 2007 5:21 pm

Would it be helpful to glue on a circle of PVC from a cap or plug to double the thickness where the valve gets tapped?

WOW!! · Fri Mar 02, 2007 8:27 pm

Not really, you don't need too. I have done it a bunch of times and they all have been fine. But it you want too I bet you could.

TimB · Mon Apr 23, 2007 7:54 pm

I havent been around air cannon forums for a few years now and just stumbled back. I'm glad to see the three tutorials i wrote what seems like so many years back are still being used and helping people. I see that this one has had over 34,000 hits. Glad to know its still helping the noobs.

frankrede · Mon Apr 23, 2007 7:57 pm

We thank you at the highest level.

smiley face · Tue May 08, 2007 9:23 am

iv just done some test with a slow motion camera and found that sprinkeler valves shoot the same as ball valves

becuse it lets air out the top it reduces the speed a littel and the air has to go through the parts of a sprinkeler valv thats why peaple are always complayning about it making a honking noise becuse the air is vibrating on all the parts of the sprinkeler valve a ball valv if turned fast can let more air flow through it becuse there is nothing in the way of the air one thing that is faster than ball valves are electricaly operated butterfly valves the same used in the punkin chunkin championships im not saying ball valves are better im saying that sprinkeler valves are not the next step if you whant to see more about elecrical valves search on the web

chaos · Tue May 08, 2007 9:35 am

iv just done some test with a slow motion camera and found that sprinkeler valves shoot the same as ball valves

want to post teh vids please?

smiley face · Thu May 10, 2007 9:30 am

how do you post pics
[/img]

cb4289 · Thu May 10, 2007 7:22 pm

what other brands work with this easly

unicyclist · Fri May 18, 2007 11:58 pm

how is this valve? I have seen just about every valve on here but this one.

[albumimg]327[/albumimg]
[albumimg]326[/albumimg]

would it be ok to remove the solenoid and drill right through that? From what I have read the rod is on the bottom, which is a good thing right?

veginator · Sat May 19, 2007 7:41 am

i dont think it would be a good idea to try and mod that valve i have seen something like it on the forums and it didnt work out to well. oh, and welcome to the forums.

e1337 · Mon Jun 04, 2007 10:09 am

Me being the idiot that i am

i've bought two sprinkler valves with guide rods. I went and bought a rain bird it works perfectally. Thanks for the help.

skiremark · Tue Jun 05, 2007 3:25 pm

I was looking at the store and would the orbits 1in jartop valves work. I was think they might not because the silinode hope is right in the middle of the top where you would screw in the top.[/quote]

spudbud101 · Thu Jun 21, 2007 4:53 am

Stupid question...

I heard from a few people that you need a compressor to use a sprinkler valve. They said you have to get a lot of pressure into the chamber fast. All I have is a bike pump. So.. do I need to buy a compressor? If so, what size? And normal prices for the US?

Check out my YouTube SpudGun Channel! · Thu Jun 21, 2007 4:59 am

You can use a bike pump, you just need to pump relativly quickly. If you do get an air compressor a 2HP 115psi 21litre/5 Gallon air compressor is a good investment.

spudbud101 · Thu Jun 21, 2007 5:03 am

Will a 5 gallon hold up? How long, if you know, can it provide a steady stream of air?

I'm just about ready for a compressor. I am using a bike pymp right now, and I need to hit about 50 PSI every time. Get a nice arm workout...