Well here is another gun i have made...
I took a "Root Feeder" sawed off the tip, and more, because there were little divits that went into the tube. Then i took a 1/4 inch tube and set that into the pipe. Later i connected this to an air compressor, then later put half of a 1/4 inch pipe and stuck that inside of the chamber, to keep the bbs from just spinning around and around. then i put another pipe onto that for more accuracy. i put it to work and boy is this baby amazing! You gotta try this!
Does anyone want to see the BB holder?
Oh yea and yesterday I tried something with the gun... i stuffed snow down the bronze pipe and let her rip! The snow didn't go far though.
What do YOU think? (#2)
- Attachments
-
- Here is the pressure part configuration
-
- Here is the whole gun put together.
-
- Here is the pipe and the connector (yellow)
- Airsoft 004.jpg (19.51 KiB) Viewed 5435 times
-
- This is a picture of the "Root Feeder" itself.
- Airsoft 003.jpg (20.84 KiB) Viewed 5435 times
Last edited by Oscarmiar on Mon Mar 05, 2007 8:11 am, edited 2 times in total.
-
imablackskater
- Specialist
- Posts: 143
- Joined: Sat Jan 13, 2007 5:52 pm
very nice and a good job with that root feeder i expect a lot more good things from you.
To answer A-98's question no it isn't too big, the brass tube is used for intimidation. Here is a picture of the barrel... i took a 1/4 inch tube and stuck it into the "root feeder", but first i had to shave off some plastic because it just barely couldn't fit.
- Attachments
-
- Here is the 1/4 inch tube inside the "Root Feeder"
Last edited by Oscarmiar on Fri Mar 09, 2007 8:15 am, edited 2 times in total.
Here is a link to my first one not nearly as good as this one 
http://www.spudfiles.com/forums/viewtop ... 467ﯓ
http://www.spudfiles.com/forums/viewtop ... 467ﯓ
I would say your new gun is a huge step forward!!! haha good job
-
spudthug
- Corporal 5
- Posts: 936
- Joined: Mon Feb 26, 2007 9:02 pm
- Location: johnsonburg, Pa USA
- Contact:
call me an idiot but how does this fire? and that isnt brass is it its copper....i could be wrong my comp is dark but anyway i like it better without the barrel on there whatever is is....brass or copper
-
VH_man
- Staff Sergeant 4
- Posts: 1827
- Joined: Sat Dec 09, 2006 6:00 pm
- Location: New Hampshire
- Been thanked: 1 time
The place i get my PEX from sells it in 30'' lenghts. i just went home (exited i had finnaly found something that fit Airsoft BB's), slapped it into a pill bottle, filled it with bb's, and hooked it up to my air compressor. it was POWERFUL. It made a pretty good mark in wood, i bet i could cut it if my compressor got any higher than 50 PSI. theres something wrong with it. And yes, i will eventually post the pics of the gun i used to blow up that can..... im estimating over 650 FPS with a 14 inch barrel..... imagine it with a 30 inch barrel...... sound barrier, here i come.
-
zeigs spud
- Corporal 2
- Posts: 657
- Joined: Tue Apr 04, 2006 10:39 pm
barrel seems too wide and too long, looks nice but not really a gun that you constructed all yourself. u kinda just put the parts together. granted thats with alot of guns, bu those need special modding.
anywho kool seems like a fun lil toy
anywho kool seems like a fun lil toy
