Auto-Ram BBMG

Building or modifying BB, Airsoft, and Pellet type of guns. Show off your custom designs, find tips and other discussion. Target practice only!
User avatar
kablooie
Specialist
Specialist
Posts: 188
Joined: Sun Feb 18, 2007 8:21 pm

Wed Aug 20, 2008 2:34 am

This is a bbmg I made inspired by the talk of using a homemade air engine to fire (and run) a gatling gun. I decided to scale it back a bit, and instead of rotating barrels I used a very simple (and easy to make) blow-forward bolt design. Here are some specs:

Air supply: 10 lb CO2 tank, or an air tank and and a bike pump
Barrel: 1/4" brakeline
Ammo: .177 cal bb's
Bolt: 1/4" compression hose insert, inside of a 1/4" compression tee
Ram: 1/4" bolt with some tape wrapped around it
Valve housing: 1/8" brass nipple

Basically, this gun works like a mini engine, and uses the exhaust to fire it. You can also think of it as a pop-off valve that vents air into the barrel. The blow-forward bolt was extremely easy to make, I got the idea from RC naval warships that sometimes use this method in their guns. This gun took a little over half a day to make, including buying parts.

The gun definitely needs some fine tuning, like a spring or wieght in the magazine, higher pressure, and different rubber band adjustment, but so far the power has been mediocre. I think it could be greatly improved though. I could start with the dead space I have...

Here's a video, please excuse the quality, this is my first video I've ever uploaded.
[youtube][/youtube]

Here are some pics and if you need any more info, just ask.
Attachments
Here's a diagram
Here's a diagram
Picture 4.png (24.89 KiB) Viewed 5528 times
The full gun in all it's glory...
The full gun in all it's glory...
The ram housing, ram and bolt housing, please excuse the tape, this is only a prototype (but could be refined).
The ram housing, ram and bolt housing, please excuse the tape, this is only a prototype (but could be refined).
The Piston/ram thing, notice the rubber bumper ring and bolts for adjustment
The Piston/ram thing, notice the rubber bumper ring and bolts for adjustment
User avatar
POLAND_SPUD
Captain
Captain
Posts: 5402
Joined: Sat Oct 13, 2007 4:43 pm
Been thanked: 1 time

Wed Aug 20, 2008 3:17 am

interesting design... why have you built it in this way ? to lower the ROF?

it seems to that it could work better if you use a strong spring instead of that rubber band and/or get a heavier ram
Last edited by POLAND_SPUD on Wed Aug 20, 2008 5:35 am, edited 1 time in total.
Children are the future

unless we stop them now
User avatar
trollhameran
Corporal
Corporal
Posts: 515
Joined: Tue Dec 04, 2007 5:41 pm

Wed Aug 20, 2008 4:39 am

Seems to works very well, except for the feeding, is it just gravity fed?
User avatar
ALIHISGREAT
Staff Sergeant 3
Staff Sergeant 3
Posts: 1778
Joined: Sat Aug 25, 2007 6:47 pm
Location: UK

Wed Aug 20, 2008 5:10 am

from the diagram it appeared that the ram goes into the mag.... but it doesn't :shock:
User avatar
POLAND_SPUD
Captain
Captain
Posts: 5402
Joined: Sat Oct 13, 2007 4:43 pm
Been thanked: 1 time

Wed Aug 20, 2008 5:34 am

@alihisgreat yeah I've noticed that too... interesting...

@kablooie are you planing to have a bolt operated by the movement of the rod ?? that's the first thing that came to my mind when I saw it
Children are the future

unless we stop them now
User avatar
littlebro05
Specialist 4
Specialist 4
Posts: 418
Joined: Wed Oct 17, 2007 5:04 am
Been thanked: 1 time

Wed Aug 20, 2008 6:14 am

POLAND_SPUD wrote:interesting design... why have you built it in this way ? to lower the ROF?

it seems to that it could work better if you use a strong spring instead of that rubber band and/or get a heavier ram
Wouldn't a light ram be better in a piston since the lighter the piston the faster it recipricates? and the faster the velocity the ram is moving at transfering the energy into the bb?

Ummu :S
It's Nerf or Nothing.

Don't start crying when I play this as my hobby, Paintball, Airsoft and Nerf are equally good hobbies, except you can play Nerf in public. Good day! Hmph!
User avatar
trollhameran
Corporal
Corporal
Posts: 515
Joined: Tue Dec 04, 2007 5:41 pm

Wed Aug 20, 2008 6:30 am

But also the faster it is reciprocating, the higher the rof will be, which makes loading the bbs harder.
User avatar
littlebro05
Specialist 4
Specialist 4
Posts: 418
Joined: Wed Oct 17, 2007 5:04 am
Been thanked: 1 time

Wed Aug 20, 2008 6:50 am

trollhameran wrote:But also the faster it is reciprocating, the higher the rof will be, which makes loading the bbs harder.
Ummu, you're right. Thought about the rate of fire didn't think about the loading process.

Oh well I don't know much about pistons anyway. Just a thought.

Edit: Did you're gun break or pierce through that paper, I was just curious.
It's Nerf or Nothing.

Don't start crying when I play this as my hobby, Paintball, Airsoft and Nerf are equally good hobbies, except you can play Nerf in public. Good day! Hmph!
User avatar
POLAND_SPUD
Captain
Captain
Posts: 5402
Joined: Sat Oct 13, 2007 4:43 pm
Been thanked: 1 time

Wed Aug 20, 2008 8:33 am

yeah that what I meant....

I am suprised that it works so well - JSR have been trying to build something like this to get pulsed air but AFAIK with no success... I am sure he is going to be interested in the results..

his piston/ram failed becasue it stayed in an open position - it didn't reciprocate (is it the right word ?? :D ) I see that your does the same occasionally but I suspect that it works better than his becasue it has greater mass....

if it's not a problem could you experiment with it by adding more mass to the ram/piston - just to see what will be different
Children are the future

unless we stop them now
User avatar
trollhameran
Corporal
Corporal
Posts: 515
Joined: Tue Dec 04, 2007 5:41 pm

Wed Aug 20, 2008 8:41 am

When I made a ram for a gatling prototype, it stayed forward as well. it was almost impossible to push the ram back in at 115psi.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26203
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 569 times
Been thanked: 344 times

Donating Members

Wed Aug 20, 2008 8:48 am

POLAND_SPUD wrote:I am suprised that it works so well - JSR have been trying to build something like this to get pulsed air but AFAIK with no success... I am sure he is going to be interested in the results.
If you're referring to this project, it actually did reciprocate, but too fast to be useful in terms of power or practicality. Clide reported similar results with the blow-forward bolt in his golf ball semi while he was experimenting with it. After endless hours of using different spring strengths and lengths as well as bolt weights, I still got the same results - it either reciprocates too fast - the same "angry wasp" effect - or not at all.

This leads me to conclude that a reciprocating system will not work well for our purposes unless the moving component also shuts off the air supply. This element has also proved to be necessary in compressed gas motors like this CO<sub>2</sub> motor, where the pin on the piston head knocks open a check valve providing a "pulsed" supply.
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
POLAND_SPUD
Captain
Captain
Posts: 5402
Joined: Sat Oct 13, 2007 4:43 pm
Been thanked: 1 time

Wed Aug 20, 2008 8:48 am

hmmm I suppose that it shouldn't be any different at 115 or 300 psi but there has to be more force reseting it and possibly more mass

was it with the same setup or did you use a stronger rubber band or a spring ? I suppose you didn't becasue I don't really understand why I won't work at higher pressures...

Is there any reason (apart from what I mentioned) why it can't work at higher pressure ??


@JSR hmmm I see..most likely you are right but I had an idea when I saw the GIF with that engine...
wouldn't a flywell work for this ? in theory it should preserve some energy that can be then used to move the bolt back (with the help of a spring)

well his design works - of course not perfectly and with little power but it does.... and It's good to see that there are people who spend time trying to build something new....
Last edited by POLAND_SPUD on Wed Aug 20, 2008 8:58 am, edited 1 time in total.
Children are the future

unless we stop them now
User avatar
psycix
Sergeant Major 4
Sergeant Major 4
Posts: 3684
Joined: Mon Jun 25, 2007 7:12 am
Location: The Netherlands

Donating Members

Wed Aug 20, 2008 8:54 am

Nicely done!
Its a great achievement that you got it to work (even if just a little).
The ROF should be lowered.
Till the day I'm dieing, I'll keep them spuddies flying, 'cause I can!

Spudfiles steam group, join!
User avatar
trollhameran
Corporal
Corporal
Posts: 515
Joined: Tue Dec 04, 2007 5:41 pm

Wed Aug 20, 2008 11:14 am

Would it slow down at all if you increased the bolts friction, maybe have rubber sides on your bolt so that it doesn't slide as easily, or perhaps greatly increase the length of travel, so that is takes longer to move back and forward.
User avatar
POLAND_SPUD
Captain
Captain
Posts: 5402
Joined: Sat Oct 13, 2007 4:43 pm
Been thanked: 1 time

Wed Aug 20, 2008 11:29 am

hmmm it's very unlikely that it will help... the problem is that the friction will also slow it down while it resets, which is something you want to avoid...

now I suppose that it could work better if it had a flywell - at least in theory.... but that's just my thought

now what jsr has posted is based on a proven design so it should work

but hey that piston is asking to be used... it would be cool if it rotated something no mater what :wink:

ohh BTW kablooie... kudos for trying to do something special
Children are the future

unless we stop them now
Post Reply