BBMG detent alternative
- Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 8 times
Just an idea, what if you put a bolt behind the spring (left side on the diagram) so you can thread it in and out to adjust the spring pressure? Just a thought.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
- jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 343 times
Put it on hold for now, a bit fiddly in the dimensions I chose. Started on something else in the meantime, trying to see if the Monsoon loader will work at lower pressures, watch this space
hectmarr wrote:You have to make many weapons, because this field is long and short life
- jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 343 times
I started on this but realised that my smallest o-ring for the blocket piston wouldn't fit, so I have to remake it with the barrel mounted off-centre.
hectmarr wrote:You have to make many weapons, because this field is long and short life
As for the design I showed here yesterday, it is really from a nerf gun. I took it off some time ago, and hooked it to a blow gun with very small air reservoir at 300 psi. I made a small video of the operation :
http://www.youtube.com/watch?feature=pl ... hDlZ1gc4tA
http://www.youtube.com/watch?feature=pl ... hDlZ1gc4tA
"J'mets mes pieds où j'veux, et c'est souvent dans la gueule."
- jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 343 times
As I think I had pointed out in an earlier thread, it's similar to what I did here.
I recently made another prototype based on the above, with the benefit of the lathe, but no real luck, it either cycled extremely fast or not at all, though by restricting the outlet with my finger it was popping away quite happily
The problem of projectile feeding remains though, you still have to hook this up to some sort of reloading breech.
I recently made another prototype based on the above, with the benefit of the lathe, but no real luck, it either cycled extremely fast or not at all, though by restricting the outlet with my finger it was popping away quite happily
The problem of projectile feeding remains though, you still have to hook this up to some sort of reloading breech.
hectmarr wrote:You have to make many weapons, because this field is long and short life
- jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 343 times
- jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 343 times
Well it sort of works... testing at 850 psi:
[youtube][/youtube]
I have a feeling cloud feeding is never going to be reliable enough...
edit: fixed embed code
[youtube][/youtube]
I have a feeling cloud feeding is never going to be reliable enough...
edit: fixed embed code
Last edited by jackssmirkingrevenge on Sun Feb 09, 2014 8:05 am, edited 1 time in total.
hectmarr wrote:You have to make many weapons, because this field is long and short life
JSR I was thinking the same thing about cloud feeding...
what if you used an inline vortex block and had a bolt portrude into the barrel partly, and used some sort of linkage to link it to that spring piston? That way you eliminate the cloud feeding..
I feel like the linkage could be somewhat difficult to implement however..
what if you used an inline vortex block and had a bolt portrude into the barrel partly, and used some sort of linkage to link it to that spring piston? That way you eliminate the cloud feeding..
I feel like the linkage could be somewhat difficult to implement however..
"Some say his pet elephant is pink, and that he has no understanding of "PG rated forum". All we know is, he's called JSR. "
- jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 343 times
It might be worth just replicating the airsoft "bullet valve" upping it to HPA:
hectmarr wrote:You have to make many weapons, because this field is long and short life
- Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 8 times
Did better than I expected... The fact that it's a cloud makes it automatically unreliable.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
- jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 343 times
I would be a shame to let go of the detent though.
Hmmm... gas operation?
Hmmm... gas operation?
- Attachments
-
- heresasillythought.png (7.71 KiB) Viewed 9463 times
hectmarr wrote:You have to make many weapons, because this field is long and short life
I mean I guess... except thats basically a blowback design, and I dunno how practically feasible it would be round 800 psi unless that forward piston is HUGE,
plus, still doesn't solve the problem of cloud feeding
plus, still doesn't solve the problem of cloud feeding
"Some say his pet elephant is pink, and that he has no understanding of "PG rated forum". All we know is, he's called JSR. "
- Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 8 times
That just complicates a design you've already proven unreliable.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
- jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 343 times
True.Gun Freak wrote:That just complicates a design you've already proven unreliable.
I think the "gas blowback" idea has potential though. It needs 1500 psi to work, but then again it needs to recock a substantial hammer magazine as well as cycling the bolt.
Just to cycle a barrel sleeve, it really doesn't need so much force.I dunno how practically feasible it would be round 800 psi unless that forward piston is HUGE
Say a 4mm OD barrel and a 10mm piston, just 10 psi gives you a full pound pushing on the piston, albeit for a brief moment.
Combined with a pop-off perhaps...
hectmarr wrote:You have to make many weapons, because this field is long and short life